---
title: "How a Cyclotron Works: Diagram, Formulas and a Live Model · Cyclotron Info"
canonical: https://cyclotroninfo.com/learn/how-a-cyclotron-works/
description: "The cyclotron explained from the Lorentz force to the resonance condition, with the frequency and energy formulas, focusing, the relativistic limit, and a labeled animated model whose field and dee voltage you set yourself."
generated: 2026-11-22
note: "Markdown rendering of the canonical HTML page, generated at build for AI assistants and text tools. Figures and interactive elements are described, not reproduced. On Design Guide rules the source quote, this site's paraphrase and this site's editorial note are labelled separately and must not be conflated."
licence: "Datasets CC BY 4.0, census snapshot CC BY-NC 4.0 (https://cyclotroninfo.com/data/); cite as Cyclotron Info, cyclotroninfo.com"
---
# How a Cyclotron Works

The physics of the classical cyclotron, from the Lorentz force to the relativistic ceiling — written for a motivated general reader, with enough precision to be useful to an undergraduate or a builder. [Figure 1](https://cyclotroninfo.com/learn/how-a-cyclotron-works/#fig-1) is a working model rather than a diagram: it accelerates a proton turn by turn, with the magnetic field and dee voltage on sliders, and every quantity in the text below recomputes from the same physics in the [calculators](https://cyclotroninfo.com/calculators/).

## The problem it solves

To probe an atomic nucleus you must throw a charged particle at it with an energy of millions of electron-volts (MeV). The direct approach — accelerate the particle across a single gap held at millions of volts — runs straight into the limits of insulation: somewhere around a few MV, everything arcs. In 1928 Rolf Wideröe demonstrated the way around this: use a *modest* alternating voltage many times, timed so the particle always arrives when the push is in its direction. Wideröe's machine was a linear accelerator, and it got long fast — each successive push happens at higher speed, so each drift section must be longer than the last.

Ernest Lawrence's insight of 1929 was that a magnetic field can fold that long line into a compact spiral. Bend the particle in a circle, and it can cross the *same* accelerating gap over and over. Better still — and this is the fact the whole machine hangs on — the time per lap turns out not to depend on how fast the particle is going. Figure 1 shows the result in motion: two electrodes, one alternating voltage, and a particle climbing an ever-tightening spiral.

[Figure, drawn on the page: Top view of a classical cyclotron: two D-shaped electrodes with a gap between them, an ion source near the center, a spiral orbit widening outward, and a beam exit at the rim. An RF oscillator drives the dees in opposite polarity.]

*Figure caption:* **Figure 1** — a classical cyclotron viewed from above, computed for protons in a small machine (12 cm extraction radius) with the magnetic field pointing out of the page. The RF oscillator drives the dees in antiphase at f = qB/2πm; each gap crossing — assumed to happen at the RF crest — adds qV of energy, so after n crossings the radius is r₁√n: equal energy steps, ever-tighter turns. Dee geometry is schematic; the orbit is exact. At the default 1.0 T and 10 kV the RF runs at 15.2 MHz and the proton makes about 35 turns to reach 690 keV — a real trip of roughly two microseconds. The animation runs about ten million times slower than real time (the on-screen rotation rate still scales with B) and progressively time-lapses later turns — up to ~50× more at the densest settings — so any run finishes in under a minute. When the polarity alternation becomes too fast to draw, the polarity badges read ± and the dee shading settles to a steady mix.

## A charged particle in a magnetic field

A particle of charge q moving with velocity v through a magnetic field B feels the Lorentz force,

F = q v × B,

which is always perpendicular to the velocity. A force that never points along the motion does no work — it changes the particle's direction but not its speed. In a uniform field, a particle moving in the plane perpendicular to B therefore travels in a circle, with the magnetic force supplying the centripetal force:

qvB = mv<sup>2</sup>/r ⇒ r = mv/qB = p/qB.

The orbit radius grows in proportion to momentum. A slow proton circles near the center of the magnet; a fast one sweeps a wide arc near the edge. Read backwards, this is also the machine's energy gauge: the momentum of a particle on its outermost orbit is p = qBr, fixed entirely by the field and the radius. For a proton in a 1 T field reaching a radius of 0.5 m, that works out to about 12 MeV — the [energy calculator](https://cyclotroninfo.com/calculators/cyclotron-energy/) does this arithmetic for any particle, field, and radius.

## The resonance condition

How long does one lap take? The circumference is 2πr and the speed is v, so the period is T = 2πr/v = 2πm/qB — the radius and speed cancel. Every lap takes the same time, no matter how fast the particle is going, because faster particles travel proportionally larger circles. The orbital frequency, called the **cyclotron frequency**, is

f = qB / 2πm.

For protons this is 15.2 MHz per tesla of field — squarely in the shortwave radio band for the fields ordinary iron magnets produce. That constancy is the cyclotron's central trick: an alternating voltage at this one fixed frequency stays in step with the particle from its first lap to its last. The particle and the radio wave are in *resonance*. In Figure 1 this is why one slider — B — sets the rotation rate: nothing else enters. The RF-system practice built on this condition — oscillators, dee voltage, frequency tolerance — is collected in the design guide’s [RF rules](https://cyclotroninfo.com/design-guide/rf/).

## Dees and the accelerating gap

The classical cyclotron places two hollow, D-shaped copper electrodes — the **dees** — face to face inside a vacuum chamber between the magnet poles, with a narrow gap between them. An RF oscillator drives the dees in antiphase at the cyclotron frequency, so an electric field appears across the gap, reversing direction every half-cycle. Inside a dee the particle coasts in a field-free half-circle; each time it crosses the gap, it arrives just as the field points its way, and picks up energy qV, where V is the gap voltage at crossing.

Two crossings per lap, thousands of laps: a dee voltage of a few kV builds to hundreds of keV or MeV, and the orbit spirals outward as the momentum grows. Equal energy steps mean the radius grows only as the square root of the crossing count — which is why the turns in Figure 1 crowd ever closer together toward the rim. The number of turns required is roughly the final energy divided by the energy gained per turn (2qV at best), and the total path length can run to hundreds of meters — which is why the vacuum must be good enough that the particle survives the trip without scattering off residual gas. The [path-length calculator](https://cyclotroninfo.com/calculators/path-length/) and the [vacuum calculator](https://cyclotroninfo.com/calculators/vacuum/) quantify both sides of that bargain.

That is the complete classical cyclotron: a magnet to bend the orbit, an RF drive at the matching frequency, two dees to deliver the pushes, and a vacuum good enough to survive the trip. It is the machine of Lawrence and Livingston's 1932 paper, and it is the machine nearly every [amateur build](https://cyclotroninfo.com/builds/) attempts. Everything below is about what this simple picture leaves out — first the timing, then the focusing, then the relativistic limit that ends the classical design.

## Staying in step: phase

Resonance is never perfect. If the RF frequency, the field, or the particle's mass drifts, the particle arrives at the gap slightly early or late — its *phase* slips. A particle that slips too far arrives when the field opposes it and is decelerated; the beam is lost. A classical fixed-frequency cyclotron therefore has a phase budget: the total slip accumulated over all turns must stay within roughly ±90° (Livingood 1961, ch. 6). How much frequency or field error that allows depends on how many turns the beam makes: a constant fractional mismatch δ slips the phase by 2πNδ over N turns, so a machine that needs 100 turns holds its ±90° budget only for δ below about 0.25%, while one that reaches full radius in 25 turns tolerates 1%. Fewer turns at higher dee voltage spend the budget more slowly — one reason builders chase dee voltage.

## Weak focusing: the field index

A beam also has to be held together vertically. A particle drifting above the magnet midplane must feel a force pushing it back down, or it will strike a dee within a few turns. In a classical cyclotron this **axial focusing** comes from making the field decrease slightly with radius: the field lines then bow outward, and their radial component pushes off-plane particles back toward the midplane (Figure 2, left). The amount of decrease is captured by the **field index**,

n = −(r/B) (dB/dr).

Vertical focusing requires n > 0 (field falling with radius); radial orbit stability requires n < 1 (Figure 2, right). Classical machines run with a small positive index — typically a few hundredths to ~0.2 near extraction — produced by shimming the pole faces. This is *weak* focusing: gentle restoring forces, large vacuum chambers, and a beam that occupies real vertical space. The [design guide](https://cyclotroninfo.com/design-guide/magnet/) collects the practical shimming rules with their sources.

[Figure, drawn on the page: Cross-section of the magnet gap, machine center at left and pole edge at right. Field lines run from the top pole to the bottom pole, straight near the center and bowing outward near the edge where the field is weaker. An ion above the midplane feels a force arrow pointing down toward the midplane; an ion below feels a force pointing up.]

*Figure caption:* **Figure 2** — weak focusing in a field with index 0 < n < 1. Left: because the field weakens with radius, the field lines bow outward near the pole edge; away from the midplane they acquire a radial component, and the Lorentz force on a circulating ion then has a vertical part that pushes it back toward the midplane. Right: radial stability — an ion displaced outward feels more magnetic bending than its orbit needs and is pulled back in; displaced inward, less, and it drifts back out. Both restoring effects together hold the beam for its hundreds of turns (Livingood 1961).

## Why classical cyclotrons top out

The resonance condition contains the particle's mass — and relativity makes mass effectively grow with energy. At kinetic energy T, the orbital frequency falls to f/γ, where γ = 1 + T/mc<sup>2</sup>. For a 20 MeV proton, γ ≈ 1.021: by top energy the particle circulates 2% slower than the RF expects. A mismatch is not a phase: what kills the beam is the slip it accumulates, 2πNδ over N turns, and by that arithmetic a 2% mismatch spends the entire ±90° budget in about a dozen turns — while summing the growing slip over the hundreds of turns a real machine needs gives far more phase error than any dee voltage can outrun. Worse, the two fixes conflict — restoring resonance would require a field that *rises* with radius, exactly what weak focusing forbids. Bethe and Rose pointed out this ceiling in 1937; in practice, fixed-frequency classical cyclotrons top out around 10–25 MeV for protons, the exact figure set by how much dee voltage the builder can afford (Livingston & Blewett 1962, ch. 6). Two escape routes exist, and both were taken:

**The synchrocyclotron** gives up on fixed frequency. Sweeping the RF downward in step with the accelerating bunch keeps it in resonance to arbitrary γ. The price is duty cycle: only one bunch rides each frequency sweep, so the beam arrives in pulses at the modulation rate (tens to hundreds of Hz) and the average current drops by orders of magnitude compared with a CW machine. The Berkeley 184-inch and its postwar siblings reached hundreds of MeV this way.

What holds the bunch together during the sweep is **phase stability**, discovered independently by Veksler and McMillan in 1944–45: when the RF frequency *follows* the particles rather than staying fixed, ions near a stable phase are automatically herded back toward it, oscillating gently about the synchronous phase instead of drifting off resonance. Figure 3 shows the mechanism at the gap; the same principle underlies every synchrotron since.

[Figure, drawn on the page: A sine wave of gap voltage against ion arrival time. The synchronous phase sits on the falling side of the crest. An ion arriving early meets a higher voltage and gets a bigger kick; an ion arriving late meets a lower voltage and gets a smaller kick. Arrows show both drifting back toward the synchronous phase.]

*Figure caption:* **Figure 3** — phase stability, the 1945 discovery of Veksler and McMillan. The curve is the gap voltage an ion finds when it arrives. In a synchrocyclotron the revolution period lengthens as energy grows, so the stable crossing point φ<sub>s</sub> sits on the *falling* flank of the wave: an ion arriving early collects a bigger kick, gains more energy, circulates a little slower, and slips back toward φ<sub>s</sub>; a late ion collects a smaller kick and catches up. Phase errors oscillate gently about φ<sub>s</sub> instead of accumulating — the bunch is herded, not lost.

**The isochronous (AVF) cyclotron** gives up on a radially falling field. Instead the average field is made to *rise* with radius exactly as γ does, keeping the orbital period truly constant at all energies — and the vertical defocusing that rising field causes is beaten by azimuthal field variation: the poles carry ridges ("hills") and grooves ("valleys"), so the orbit scallops through alternating strong and weak field sectors, which produces a net vertical restoring force (L. H. Thomas worked this out in 1938; spiral-shaped sectors, suggested by Kerst in 1955, strengthen it further). Isochronous machines deliver continuous beam at high current and are the design of essentially every cyclotron built since the 1960s, from 12 MeV medical machines to the 520 MeV separated-sector giant at TRIUMF.

## The cyclotron among accelerators

Every circular accelerator is a different answer to the same two questions: what do you do with the magnetic field as the particle gains energy, and what do you do with the RF frequency? The sketches in the table's first column trace each answer's orbit.

| Orbit sketch | Machine | Magnetic field | RF frequency | Orbit | Beam structure | Typical reach & role |
| --- | --- | --- | --- | --- | --- | --- |
|   | **Classical cyclotron** | Constant in time, falls slightly with radius | Fixed | Spiral outward | Continuous (CW) | ≲ 25 MeV protons; the historic workhorse, and the realistic amateur machine |
|   | **Synchrocyclotron** | Constant in time, falls with radius | Swept downward each cycle | Spiral outward | Pulsed, low duty cycle | 100–1000 MeV protons; postwar meson physics, some modern compact therapy machines |
|   | **Isochronous (AVF) cyclotron** | Constant in time, *rises* with radius, varies azimuthally | Fixed | Scalloped spiral | Continuous (CW) | 10–500+ MeV; the modern standard for isotopes, therapy, and nuclear physics |
|   | **Linac** | None needed for bending | Fixed | Straight line | Pulsed or CW | keV to GeV+; injectors, medical electron machines, high-power proton drivers |
|   | **Betatron** | Ramped in time; induction (no RF gap) | — (accelerates by induced EMF) | Fixed radius | Pulsed | Tens of MeV electrons; industrial radiography, largely historic |
|   | **Synchrotron** | Ramped in time to hold radius constant | Swept upward with speed | Fixed radius (ring) | Pulsed | GeV to TeV; all frontier machines — the ring replaces the impossible giant magnet |

The cyclotron's fixed-field, fixed-frequency simplicity is exactly what makes it the one accelerator an individual or a small team can build: one magnet, one oscillator, no ramping synchronization, no injector chain. The same simplicity sets its energy ceiling — and for isotope production, beam experiments, and learning accelerator physics with real hardware, the ceiling doesn't matter.

An [entirely objective comparison](https://cyclotroninfo.com/learn/objective-comparison/) is also available.

## Go deeper

- [Energy, field & radius calculator](https://cyclotroninfo.com/calculators/cyclotron-energy/) — the relations on this page, interactive.
- [Path length & turns](https://cyclotroninfo.com/calculators/path-length/) and [vacuum & beam survival](https://cyclotroninfo.com/calculators/vacuum/).
- [The design guide](https://cyclotroninfo.com/design-guide/) — 2,199 sourced rules for actually building one.
- [Beam dynamics: an interactive laboratory](https://cyclotroninfo.com/learn/beam-dynamics/) — the focusing figures on this page made live: a field-index slider, an imperfection lab, and the 184-inch's 1947 beam loss recreated.
- [Cyclotron magnet design](https://cyclotroninfo.com/learn/magnet-design/) — the field this page assumes, and how to actually produce it.
- [Driving the dee](https://cyclotroninfo.com/learn/dee-coupling/) — how RF power gets onto the dee whose voltage this page takes as given.
- [History](https://cyclotroninfo.com/learn/history/) — how each idea on this page entered the world.

## Sources

- E. O. Lawrence & M. S. Livingston, “The Production of High Speed Light Ions Without the Use of High Voltages,” *Phys. Rev.* 40, 19 (1932) — the founding paper; resonance condition and focusing.
- J. J. Livingood, *Principles of Cyclic Particle Accelerators*, Van Nostrand, 1961 — phase budget, field index, classical-cyclotron limits.
- M. S. Livingston & J. P. Blewett, *Particle Accelerators*, McGraw-Hill, 1962 — chs. 5–6 (classical cyclotron), 10–11 (synchrocyclotron), 12 (AVF).
- H. A. Bethe & M. E. Rose, “The Maximum Energy Obtainable from the Cyclotron,” *Phys. Rev.* 52, 1254 (1937) — the relativistic limit.
- L. H. Thomas, “The Paths of Ions in the Cyclotron,” *Phys. Rev.* 54, 580 (1938) — azimuthally varying field focusing.
- E. M. McMillan, “The Synchrotron,” *Phys. Rev.* 68, 143 (1945); V. Veksler, *J. Phys. USSR* 9, 153 (1945) — phase stability.
- M. K. Craddock & K. R. Symon, “Cyclotrons and Fixed-Field Alternating-Gradient Accelerators,” and Craddock, “Eighty Years of Cyclotrons,” *Proc. CYCLOTRONS 2010* — modern survey.
