{
 "_meta": {
  "dataset": "Cyclotron Info — Construction Classics (hosted public-domain documents)",
  "url": "https://cyclotroninfo.com/library/classics/",
  "license": "Index: CC BY 4.0. The documents themselves are public domain (US government works), each with its rights rationale on its page.",
  "attribution": "Cyclotron Info (cyclotroninfo.com)",
  "exported": "2026-11-22",
  "note": "The PDFs are linked from each collection page; files over 25 MiB are served from files.cyclotroninfo.com. Scans are hosted bit-exact except AD-755510, which carries notice pages for five figures licensed to the US Army.",
  "count": 29,
  "pdf_count": 69
 },
 "documents": [
  {
   "slug": "electrons-in-gas",
   "title": "Electrons in gas — four documents, 1922–1970",
   "report": "BSTJ 1922 · Phys. Rev. 1925 · NASA SP-3012 · NASA TN D-6005",
   "year": "1922–70",
   "lab": "Western Electric · Caltech · National Bureau of Standards · NASA Langley",
   "pages": 178,
   "pdfs": 4,
   "size": "four PDFs, 14.8 MB total",
   "summary": "What happens to electrons that travel through gas rather than vacuum. Johnson focuses a 300-volt beam with a trace of argon and explains why by ion space charge; Brode measures how strongly each gas removes slow electrons from a beam; Berger and Seltzer tabulate range and X-ray yield from 10 keV up; a Langley wind-tunnel team puts a spectrograph on the glow of a 26 keV beam and finds trace nitrogen doing most of the shining.",
   "library_ids": [
    "lib-295",
    "lib-297",
    "lib-298",
    "lib-296"
   ],
   "url": "https://cyclotroninfo.com/library/classics/electrons-in-gas/"
  },
  {
   "slug": "filament-ion-sources",
   "title": "Hot-filament arc sources — five documents, 1925–1954",
   "report": "Smyth 1925 · Hogness & Lunn 1925 · ORNL-1525 · ORNL-1758 · AECU-2907",
   "year": "1925–54",
   "lab": "Princeton · UC Berkeley · Oak Ridge National Laboratory · Ohio State University",
   "pages": 103,
   "pdfs": 5,
   "size": "five PDFs, 19.2 MB total",
   "summary": "The component most small cyclotrons share, from three directions. Two 1925 Physical Review papers settle which hydrogen ions an electron-impact discharge makes and which knobs shift the mix; two Oak Ridge calutron reports weigh filaments to find out why they die and show a four-light-bulb ballast that doubles their life; the Ohio State final report writes down the procedure for positioning a filament while watching the beam.",
   "library_ids": [
    "lib-313",
    "lib-314",
    "lib-312",
    "lib-311",
    "lib-310"
   ],
   "url": "https://cyclotroninfo.com/library/classics/filament-ion-sources/"
  },
  {
   "slug": "mddc-1045",
   "title": "R.F. System for Frequency Modulated Cyclotron",
   "report": "MDDC-1045",
   "year": 1946,
   "lab": "University of California Radiation Laboratory",
   "pages": 12,
   "pdfs": 1,
   "size": "1.1 MB",
   "summary": "The RF system of the first synchrocyclotron — the Berkeley 37-inch FM conversion — at amateur scale: one dee, 5 kW, commercial triodes, and a worked phase-correction analysis.",
   "library_ids": [
    "lib-204"
   ],
   "url": "https://cyclotroninfo.com/library/classics/mddc-1045/"
  },
  {
   "slug": "184-inch-commissioning",
   "title": "The 184-inch Commissioning Papers, 1946–47",
   "report": "MDDC series",
   "year": 1947,
   "lab": "University of California Radiation Laboratory",
   "pages": 42,
   "pdfs": 6,
   "size": "six PDFs, 1.3 MB total",
   "summary": "Six declassified memos from the 184-inch’s first year: the beam that stopped at 82 inches, the experiments that found out why, and the fixes that failed — raw commissioning logs, the scarcest content class.",
   "library_ids": [
    "lib-205"
   ],
   "url": "https://cyclotroninfo.com/library/classics/184-inch-commissioning/"
  },
  {
   "slug": "aecd-2149",
   "title": "Character of the Radiation Field and Shielding at the 184-Inch Cyclotron",
   "report": "AECD-2149",
   "year": 1947,
   "lab": "University of California Radiation Laboratory",
   "pages": 6,
   "pdfs": 1,
   "size": "1.1 MB",
   "summary": "The collection’s first MEASURED shielding source rather than a method: half-value thicknesses for six materials taken with the cyclotron itself as the neutron source, the composite-layer result that paraffin behind lead doubles the reading, and a dose map normalised to beam current. B. J. Moyer later gave his name to the Moyer model.",
   "library_ids": [
    "lib-242"
   ],
   "url": "https://cyclotroninfo.com/library/classics/aecd-2149/"
  },
  {
   "slug": "ucrl-64",
   "title": "Design of the Radio-Frequency System for the 184-inch Cyclotron",
   "report": "UCRL-64",
   "year": 1948,
   "lab": "University of California Radiation Laboratory",
   "pages": 47,
   "pdfs": 1,
   "size": "9.6 MB",
   "summary": "The design history of the 184-inch RF system by the four engineers who built it, written so that \"others designing frequency-modulated oscillators\" could reuse the reasoning.",
   "library_ids": [
    "lib-203"
   ],
   "url": "https://cyclotroninfo.com/library/classics/ucrl-64/"
  },
  {
   "slug": "extraction-hardware",
   "title": "Beam extraction hardware — four reports, 1948–1963",
   "report": "UCRL-95 · UCRL-3476 · UCRL-8578 · UCRL-10655",
   "year": "1948–63",
   "lab": "UC Radiation Laboratory · Lawrence Radiation Laboratory",
   "pages": 94,
   "pdfs": 4,
   "size": "four PDFs, 13.3 MB total",
   "summary": "Fifteen years of Berkeley answering the hardest question in a small build four ways: a sixteen-thyratron deflector pulser, regenerative extraction theory, RF-driven extraction, and a supply that limits the energy of each spark rather than trying to prevent it.",
   "library_ids": [
    "lib-212",
    "lib-213",
    "lib-214",
    "lib-215"
   ],
   "url": "https://cyclotroninfo.com/library/classics/extraction-hardware/"
  },
  {
   "slug": "model-and-computation",
   "title": "Knowing before building — four reports, 1947 and 1961",
   "report": "AECD-1850 · UCRL-31 · MSUCP-9 · MSUCP-12",
   "year": "1947–61",
   "lab": "UC Radiation Laboratory · Michigan State University",
   "pages": 127,
   "pdfs": 4,
   "size": "four PDFs, 20.1 MB total",
   "summary": "One question answered two ways fourteen years apart. The 1947 pair is a proposal and its verification three months later: MacKenzie sets out the “three quarter wave” RF system, then Anderson reports the half-scale model tests of it. Plus two 1961 MSU computations — resonant-extraction optics by orbit tracking, and analytic dee field formulas that are size-independent.",
   "library_ids": [
    "lib-236",
    "lib-237",
    "lib-238",
    "lib-243"
   ],
   "url": "https://cyclotroninfo.com/library/classics/model-and-computation/"
  },
  {
   "slug": "ucrl-476",
   "title": "General Recommendations for Design of Small Cyclotrons",
   "report": "UCRL-476",
   "year": 1949,
   "lab": "University of California Radiation Laboratory",
   "pages": 18,
   "pdfs": 1,
   "size": "3.0 MB",
   "summary": "The only report written for someone about to build a small cyclotron — a design cookbook with a working 6-inch machine as the example.",
   "library_ids": [
    "lib-007"
   ],
   "url": "https://cyclotroninfo.com/library/classics/ucrl-476/"
  },
  {
   "slug": "tid-5215",
   "title": "Magnets and Magnetic Measuring Techniques",
   "report": "TID-5215",
   "year": 1949,
   "lab": "UC Radiation Laboratory, Berkeley",
   "pages": 226,
   "pdfs": 1,
   "size": "52 MB, served from files.cyclotroninfo.com",
   "summary": "A 226-page AEC volume about magnets and nothing else, from the laboratory that had built more cyclotron magnets than anywhere on earth. Four chapters: design requirements, measuring instruments and technique, MODEL magnets and their performance, and tests on full-scale magnets. The model-magnet chapter answers a question this collection had been chasing through undigitised reports.",
   "library_ids": [],
   "url": "https://cyclotroninfo.com/library/classics/tid-5215/"
  },
  {
   "slug": "nyo-780",
   "title": "Design and Construction of Synchro-Cyclotron",
   "report": "NYO-780",
   "year": 1950,
   "lab": "Carnegie Institute of Technology",
   "pages": 84,
   "pdfs": 1,
   "size": "6.7 MB",
   "summary": "One institution building one synchrocyclotron from scratch — model magnets, coil winding, leak testing, oscillator debugging, shielding — in a single final report.",
   "library_ids": [
    "lib-202"
   ],
   "url": "https://cyclotroninfo.com/library/classics/nyo-780/"
  },
  {
   "slug": "aecu-1951",
   "title": "The University of Washington 60-Inch Cyclotron",
   "report": "AECU-1951",
   "year": 1951,
   "lab": "University of Washington",
   "pages": 128,
   "pdfs": 1,
   "size": "35 MB, served from files.cyclotroninfo.com",
   "summary": "A construction record, the scarcest class here: a 60-inch machine for 20 MeV deuterons, documented from buildings through magnet to vacuum system. Built deliberately from Berkeley’s Crocker cyclotron drawings, supplied by E. O. Lawrence — a documented case of copying a machine known to work rather than originating a design. Half its concrete building is buried.",
   "library_ids": [],
   "url": "https://cyclotroninfo.com/library/classics/aecu-1951/"
  },
  {
   "slug": "tid-454",
   "title": "Cyclotron Component Design Technical Reports",
   "report": "TID-454",
   "year": 1952,
   "lab": "Carnegie Institute of Technology",
   "pages": 186,
   "pdfs": 1,
   "size": "33.7 MB, served from files.cyclotroninfo.com",
   "summary": "The engineering behind NYO-780, under the same ONR contract: seven technical reports on magnets, vacuum, frequency modulation, RF and extraction timing — including the collection’s only cost-minimised magnet design, optimised against the unit cost of steel, copper and ten-year energy.",
   "library_ids": [
    "lib-219"
   ],
   "url": "https://cyclotroninfo.com/library/classics/tid-454/"
  },
  {
   "slug": "test-cyclotron",
   "title": "The 22-inch test cyclotron — seven reports, 1951–1955",
   "report": "ORNL-1269 · 1383 · 1531 · 1663 · 1670 · 1795 · 1884",
   "year": "1951–55",
   "lab": "Oak Ridge National Laboratory",
   "pages": 256,
   "pdfs": 7,
   "size": "seven PDFs, 35.6 MB total",
   "summary": "Consecutive progress reports following ONE small cyclotron for three and a quarter years — first resolved proton orbits, a rename from 22-inch to 44-inch when the magnet was reworked, a rebuild for 100 kV dees and dual-radius running, then assembly. Includes the contractor’s brazing errors and the funding delays.",
   "library_ids": [
    "lib-226",
    "lib-227",
    "lib-228",
    "lib-229",
    "lib-230",
    "lib-231",
    "lib-232"
   ],
   "url": "https://cyclotroninfo.com/library/classics/test-cyclotron/"
  },
  {
   "slug": "ornl-1196",
   "title": "The Oak Ridge 86-Inch Cyclotron",
   "report": "ORNL-1196",
   "year": 1952,
   "lab": "Oak Ridge National Laboratory",
   "pages": 145,
   "pdfs": 1,
   "size": "13.0 MB",
   "summary": "The most complete construction-and-commissioning record in the open literature: excavation to milliampere beams in two years, every subsystem documented and costed.",
   "library_ids": [
    "lib-017"
   ],
   "url": "https://cyclotroninfo.com/library/classics/ornl-1196/"
  },
  {
   "slug": "targets",
   "title": "Targets and the target plane — three reports, 1952–1961",
   "report": "ORNL-1347 · ORNL-1348 · ORNL-3021",
   "year": "1952–61",
   "lab": "Oak Ridge National Laboratory",
   "pages": 33,
   "pdfs": 3,
   "size": "three PDFs, 1.1 MB total",
   "summary": "The target plane end to end: a bench recipe for self-supporting boron and magnesium films at tens of µg/cm², and two methods for measuring the beam that hits them — including the finding that internal beam energy can sit ±10% off the value calculated from field and radius.",
   "library_ids": [
    "lib-222",
    "lib-223",
    "lib-224"
   ],
   "url": "https://cyclotroninfo.com/library/classics/targets/"
  },
  {
   "slug": "commissioning",
   "title": "Commissioning Practice — three reports, 1952–1966",
   "report": "ORNL-1339 · ORNL-1345 · UCD-CNL-49",
   "year": "1952–66",
   "lab": "Oak Ridge National Laboratory · Crocker Nuclear Laboratory",
   "pages": 70,
   "pdfs": 3,
   "size": "three PDFs, 3.4 MB total",
   "summary": "What happens after first assembly: two consecutive Oak Ridge quarterlies logging three cyclotrons commissioned side by side — including a 63-inch holding 75 kV dee-to-dee against a 60 kV design — plus a study of retrofitting an axial ion source into a working machine.",
   "library_ids": [
    "lib-216",
    "lib-217",
    "lib-218"
   ],
   "url": "https://cyclotroninfo.com/library/classics/commissioning/"
  },
  {
   "slug": "ucrl-3187",
   "title": "Studies with a Three-Dee Three-Phase Proton Cyclotron",
   "report": "UCRL-3187",
   "year": 1955,
   "lab": "UC Radiation Laboratory",
   "pages": 18,
   "pdfs": 1,
   "size": "3.2 MB",
   "summary": "The closest size match the repository searches have found: a 20-inch machine built around a magnet that was already available, where moving the ion source off centre doubled the beam and two independent current measurements were made to disagree in public.",
   "library_ids": [
    "lib-210"
   ],
   "url": "https://cyclotroninfo.com/library/classics/ucrl-3187/"
  },
  {
   "slug": "rf-power",
   "title": "RF Power Engineering — four reports, 1955–1965",
   "report": "UCRL-9435 · UCRL-3153 · ORNL-2403 · COO-535-543",
   "year": "1955–65",
   "lab": "UC Radiation Laboratory · Oak Ridge · University of Colorado",
   "pages": 93,
   "pdfs": 4,
   "size": "four PDFs, 10.5 MB total",
   "summary": "How to drive the dees, from three directions: a three-phase system for three-dee machines, an argument that the accelerating waveform should be a square wave rather than a sine, and a power amplifier rebuilt around a ceramic tetrode.",
   "library_ids": [
    "lib-207",
    "lib-208",
    "lib-209"
   ],
   "url": "https://cyclotroninfo.com/library/classics/rf-power/"
  },
  {
   "slug": "residual-radiation",
   "title": "Residual radiation and personnel dose — two reports, 1958–1961",
   "report": "UCRL-8276 · ORNL-3158",
   "year": "1958–61",
   "lab": "Crocker Laboratory · Oak Ridge National Laboratory",
   "pages": 38,
   "pdfs": 2,
   "size": "two PDFs, 3.0 MB total",
   "summary": "What a running cyclotron leaves behind, measured rather than estimated: the activation products a machine structure becomes, nuclide by nuclide and alloy by alloy, and five years of film-badge dose for the crew who had to walk up to the target.",
   "library_ids": [
    "lib-220",
    "lib-221"
   ],
   "url": "https://cyclotroninfo.com/library/classics/residual-radiation/"
  },
  {
   "slug": "rochester-27-inch",
   "title": "The Rochester 27-inch — five reports, 1954–1962",
   "report": "NYO-9359 · NYO-9358 · NYO-3823 · NYO-9683 · NYO-9360",
   "year": "1954–62",
   "lab": "University of Rochester",
   "pages": 128,
   "pdfs": 5,
   "size": "five PDFs, 11.0 MB total",
   "summary": "One 27-inch university machine across eight years, both halves of its life. Two machine reports — a spark gap that starts an oscillator stuck below its multipactor band, and a hooded arc source that makes more ions from less filament — and three on what came after: external-beam focusing and analysis, a broad-range spectrograph, and fast-neutron time-of-flight. The same laboratory that published a spectrograph also had to publish a note about a spark gap.",
   "library_ids": [
    "lib-233",
    "lib-234",
    "lib-235",
    "lib-250",
    "lib-251"
   ],
   "url": "https://cyclotroninfo.com/library/classics/rochester-27-inch/"
  },
  {
   "slug": "ornl-2648",
   "title": "The Oak Ridge Relativistic Isochronous Cyclotron",
   "report": "ORNL-2648",
   "year": 1958,
   "lab": "Oak Ridge National Laboratory",
   "pages": 134,
   "pdfs": 1,
   "size": "7.0 MB",
   "summary": "The ORIC design study by Blosser, Cohen, Gordon, and Welton — the report that established the model-magnet method behind every modern AVF cyclotron.",
   "library_ids": [
    "lib-073"
   ],
   "url": "https://cyclotroninfo.com/library/classics/ornl-2648/"
  },
  {
   "slug": "ornl-2644",
   "title": "Cyclotrons and High-Energy Accelerators — 1958",
   "report": "ORNL-2644",
   "year": 1958,
   "lab": "Oak Ridge National Laboratory",
   "pages": 317,
   "pdfs": 1,
   "size": "18.6 MB",
   "summary": "The 1958 world accelerator census: standardized magnet, RF, vacuum, and beam data sheets for 140 machines — what everyone else chose, in one public-domain volume.",
   "library_ids": [
    "lib-206"
   ],
   "url": "https://cyclotroninfo.com/library/classics/ornl-2644/"
  },
  {
   "slug": "anl-5907",
   "title": "The Argonne 60-Inch Cyclotron",
   "report": "ANL-5907",
   "year": 1959,
   "lab": "Argonne National Laboratory",
   "pages": 40,
   "pdfs": 1,
   "size": "12.7 MB",
   "summary": "A terse system-by-system record of a mature workhorse, with acceptance specs, measured tolerances, and the collection’s only suppliers-and-fabricators list.",
   "library_ids": [
    "lib-047"
   ],
   "url": "https://cyclotroninfo.com/library/classics/anl-5907/"
  },
  {
   "slug": "xray-output",
   "title": "X-ray output below 100 kV — four documents, 1961–1978",
   "report": "NBS Handbook 76 · BRH/DEP 70-1 · NBS Handbook 111 · FDA 79-8071",
   "year": "1961–78",
   "lab": "National Bureau of Standards · Bureau of Radiological Health",
   "pages": 252,
   "pdfs": 4,
   "size": "four PDFs, 11.8 MB total",
   "summary": "How many X-rays an evacuated gap with kilovolts across it makes, measured. A 1970 federal survey of classroom discharge tubes, including the ones not meant to emit, read at 1 to 16 ft; a 1978 compendium of tungsten-tube output and spectra at 20–60 kVp; the 1961 handbook that wrote down the barrier equation and the lead transmission curves behind it; and the 1972 analytical-equipment standard on gassy rectifiers, pinhole leaks and meters that read low.",
   "library_ids": [
    "lib-292",
    "lib-289",
    "lib-294",
    "lib-290"
   ],
   "url": "https://cyclotroninfo.com/library/classics/xray-output/"
  },
  {
   "slug": "ucrl-10654",
   "title": "Electrical Design of Electrostatic Deflectors for Sector-Focused Cyclotrons",
   "report": "UCRL-10654",
   "year": 1963,
   "lab": "Lawrence Radiation Laboratory",
   "pages": 38,
   "pdfs": 1,
   "size": "4.7 MB",
   "summary": "The measured basis for beam extraction — long the thinnest subject in this collection, and the report that started closing it. Electrode materials ranked by spark damage, the VE relationship, a stated design derating, and the tungsten-versus-carbon septum trade, all from the 88-Inch Cyclotron.",
   "library_ids": [
    "lib-211"
   ],
   "url": "https://cyclotroninfo.com/library/classics/ucrl-10654/"
  },
  {
   "slug": "ornl-3540",
   "title": "A Proposal for the Mc² Isochronous Cyclotron",
   "report": "ORNL-3540",
   "year": 1963,
   "lab": "Oak Ridge National Laboratory",
   "pages": 327,
   "pdfs": 1,
   "size": "26.5 MB, served from files.cyclotroninfo.com",
   "summary": "A complete engineering design for a machine never built: an 810 MeV eight-sector isochronous cyclotron, worked to construction standard across fourteen chapters — including shielding, costs and schedule, the sections almost no accelerator document contains.",
   "library_ids": [
    "lib-225"
   ],
   "url": "https://cyclotroninfo.com/library/classics/ornl-3540/"
  },
  {
   "slug": "operations-records",
   "title": "Operations records — two reports, 1964 and 1970",
   "report": "NRL-MR-2103 · Harvard Cyclotron Laboratory quarterly",
   "year": "1964–70",
   "lab": "Naval Research Laboratory · Harvard University",
   "pages": 49,
   "pdfs": 2,
   "size": "two PDFs, 2.5 MB total",
   "summary": "Two machines being run rather than built. NRL accounts for every hour of six months: 60.1% operating, and power supplies and vacuum together taking twelve times more time than the RF. Harvard opens on four days lost to a cold-trap refrigerator and low diffusion-pump oil. Nobody writes an operations report to be instructive, which is what makes them worth reading.",
   "library_ids": [
    "lib-244",
    "lib-245"
   ],
   "url": "https://cyclotroninfo.com/library/classics/operations-records/"
  },
  {
   "slug": "accelerator-radiation-protection",
   "title": "Accelerator Radiation Protection",
   "report": "AD-755510 / TR-73-7",
   "year": 1972,
   "lab": "US Army Natick Laboratories",
   "pages": 196,
   "pdfs": 1,
   "size": "19.3 MB",
   "summary": "Written to support drafting an Army regulation, and scoped to accelerators below 40–50 MeV — the only document here whose energy range starts where a small machine sits. X-ray and neutron shielding, induced radioactivity, exposure limits, pulsed-beam measurement, interlocks. Five figures borrowed from McGraw-Hill and ASME are replaced by notice pages.",
   "library_ids": [
    "lib-239"
   ],
   "url": "https://cyclotroninfo.com/library/classics/accelerator-radiation-protection/"
  }
 ]
}