{
 "_meta": {
  "dataset": "Cyclotron Info — amateur cyclotron builds census",
  "url": "https://cyclotroninfo.com/builds/",
  "license": "CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/)",
  "attribution": "Cyclotron Info (cyclotroninfo.com)",
  "exported": "2026-11-22",
  "note": "Documented amateur and school cyclotron projects, each cited to its public record; `status` is the editorial reading of that record (operated, beam-demonstrated, in-progress, stalled, unknown). Method: https://cyclotroninfo.com/about/methodology/",
  "count": 27
 },
 "builds": [
  {
   "id": "el-cerrito-1947",
   "name": "El Cerrito High School Cyclotron",
   "builders": "Four students with physics teacher Ben Siegel, El Cerrito High School, California",
   "country": "USA",
   "years": {
    "start": 1947,
    "first_beam": null,
    "label": "1947"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {
    "Magnet": "≈0.5 t welded soft-steel double yoke; ≈1 t machine",
    "RF frequency": "20 MHz (reported), ≈1.5 kW",
    "Particle": "protons",
    "Energy": "“million-electron-volt” claimed in period press; unverified"
   },
   "summary": "The earliest well-documented school-built cyclotron, constructed in about three months for roughly $500 and featured in Popular Science in 1947 (and, per a later account, in Physics Today). The students operated the machine by remote control from a plywood panel in a closet-sized room, and the Research Corporation waived royalties on the Lawrence cyclotron patents it infringed. Contemporary press reported the machine running at 20 MHz, but no beam measurements survive, so the million-electron-volt figure should be read as a period claim.",
   "links": [
    {
     "label": "Popular Science, Nov 1947 (Modern Mechanix scan)",
     "url": "http://blog.modernmechanix.com/boys-build-a-cyclotron/"
    },
    {
     "label": "Popular Science article scan (RF Cafe)",
     "url": "https://www.rfcafe.com/references/popular-science/cyclotron-popular-science-november-1947.htm"
    },
    {
     "label": "Symmetry: The do-it-yourself cyclotron (2010)",
     "url": "https://www.symmetrymagazine.org/article/august-2010/do-it-yourself-cyclotron"
    }
   ],
   "compare": {
    "builder_type": "high-school",
    "magnet": {
     "kind": "built",
     "desc": "welded soft-steel double yoke, half-ton, 6,000-turn hand-wound coils (Oakland Central Trade School did the grinding/welding)",
     "src": "Popular Science Nov 1947 (RF Cafe / Modern Mechanix scans), body text para 7",
     "quote": "the chunks were ground down and welded into a double yoke weighing half a ton"
    },
    "size": null,
    "field_t": null,
    "rf_mhz": {
     "v": 20,
     "note": "transmitter output frequency as reported by the magazine; not stated as a measured resonance",
     "src": "Popular Science Nov 1947 (RF Cafe scan), 'Power transmitter' photo caption",
     "quote": "puts out 1,500 watts of power on a 20-megacycle frequency",
     "tier": "reported"
    },
    "vacuum": {
     "text": "mechanical roughing pump + glass mercury diffusion pump; pressure unquantified ('a very minute fraction of an atmosphere')",
     "src": "Popular Science Nov 1947 (both scans), body text para 8",
     "quote": "the apparatus can produce a vacuum equivalent to only a very minute fraction of an atmosphere",
     "short": "unquantified"
    },
    "particle": {
     "text": "protons (electrolytic hydrogen via heated palladium valve)",
     "src": "Popular Science Nov 1947 (RF Cafe scan), 'Proton bullets' photo caption",
     "quote": "Proton \"bullets,\" nuclei of hydrogen atoms, are produced in this generator, which breaks water down",
     "short": "p"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented (internal target placed through a 1/2-inch opening)",
     "src": "Popular Science Nov 1947 (RF Cafe scan), 'To place a target' photo caption",
     "quote": "the operators will use tongs and an opening only 1/2-inch in diameter"
    },
    "design_energy_note": "\"million-electron-volt\" per Popular Science Nov 1947 photo caption (period press claim; no beam measurement reported — article says isotopes had not yet been produced)",
    "dee_voltage_kv": null,
    "rf_power_w": {
     "v": 1500,
     "src": "Popular Science Nov 1947 (RF Cafe scan), 'Power transmitter' photo caption",
     "quote": "Transmitter operates on 2,000 volts at one ampere; and puts out 1,500 watts of power"
    },
    "ion_source": {
     "text": "hydrogen from water electrolysis, fed through an electrically heated palladium valve into the chamber; ionization method not described",
     "src": "Popular Science Nov 1947 (RF Cafe scan), 'Proton bullets' photo caption",
     "quote": "The hydrogen is passed through an electrically heated palladium valve ... and delivered to the cyclotron chamber"
    },
    "cost_note": "$500 cash outlay, built in three months (Popular Science Nov 1947 lead caption)"
   },
   "directory_id": "el-cerrito-high-school-1947",
   "url": "https://cyclotroninfo.com/builds/#el-cerrito-1947"
  },
  {
   "id": "howard-1948",
   "name": "Howard College Cyclotron",
   "builders": "W. H. Bancroft, Jr. and Howard College (now Samford University), Birmingham, Alabama — a faculty-led in-house build",
   "country": "USA",
   "years": {
    "start": 1948,
    "first_beam": null,
    "label": "1948 – completed by 1959; later scrapped"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {
    "Pole diameter": "406 mm (16 in), 4 in centre gap",
    "Field": "15–16 kG (≈1.5–1.6 T) design maximum, air-cooled coils",
    "RF frequency": "not stated; four 304TL tubes, 3 kW maximum output (design)",
    "Particle": "protons (intended)",
    "Energy": "4 MeV design target; no beam on record",
    "Ion source": "Oak Ridge type (design)"
   },
   "summary": "A faculty-led college build begun in 1948 at Howard College in Birmingham, Alabama — the institution that became Samford University — and still listed as under construction when its builder filled in the June 1958 world-census data sheet, ten years on. Every number on the sheet is a design figure: a 16-inch, 12-ton magnet (10 tons iron, 2 of copper) at 15–16 kilogauss with air-cooled coils, a 21-inch dee driven by four 304TL tubes at up to 50 kV dee-to-dee, an Oak Ridge-type ion source, iron-ore blocks for shielding, and a 4 MeV proton target, at an estimated total cost of $120,000 with most materials donated by local industry. The machine was completed: in 1959 the college paper's science editor described it as operational — the first cyclotron built in Alabama — and after the college's 1957 move it was relocated to the Homewood campus into its own building, where per a Samford physicist it was eventually scrapped; a 1955 photograph survives in the university archives [record extended 2026-09-12 from the Samford campus-history account]. No performance record of any kind has been found — the 1958 sheet's performance page is blank and the 1959 account is a student paper's description, not a measurement — so whether the machine ever produced beam is undocumented and its outcome is recorded as unknown.",
   "links": [
    {
     "label": "ORNL-2644 data sheet, printed pp. 119–120 (hosted)",
     "url": "/library/classics/ornl-2644/"
    },
    {
     "label": "ORNL-2644 at OSTI",
     "url": "https://www.osti.gov/biblio/4286826"
    },
    {
     "label": "The Secret Beneath Brooks Hall (Samford campus history)",
     "url": "https://secretsofsamford.wordpress.com/2022/09/23/the-secret-beneath-brooks-hall/"
    }
   ],
   "compare": {
    "builder_type": "college",
    "magnet": {
     "kind": "in-house",
     "desc": "16 in poles, 10 tons iron + 2 tons copper, 1/4 in solid-square winding, air-cooled; most materials donated by local industry",
     "src": "/library/classics/ornl-2644/ — printed p. 119 (X-882 data sheet supplied by W. H. Bancroft, Jr., June 1958; hosted scan)",
     "quote": "est. $120,000 (most materials have been donated by local industry)"
    },
    "size": {
     "mm": 406,
     "measure": "pole",
     "src": "/library/classics/ornl-2644/ — printed p. 119 (X-882 data sheet supplied by W. H. Bancroft, Jr., June 1958; hosted scan)",
     "quote": "Pole tip dia. 16 in."
    },
    "field_t": {
     "v": 1.55,
     "note": "design maximum, stated as a range; never measured on record",
     "src": "/library/classics/ornl-2644/ — printed p. 119 (X-882 data sheet supplied by W. H. Bancroft, Jr., June 1958; hosted scan)",
     "quote": "Field, max 15-16 k-gauss",
     "tier": "design"
    },
    "rf_mhz": null,
    "vacuum": {
     "text": "not stated on the 1958 data sheet",
     "short": "unquantified",
     "src": "/library/classics/ornl-2644/ — printed p. 119 (X-882 data sheet supplied by W. H. Bancroft, Jr., June 1958; hosted scan)"
    },
    "particle": {
     "text": "protons (intended)",
     "src": "/library/classics/ornl-2644/ — printed p. 119 (X-882 data sheet supplied by W. H. Bancroft, Jr., June 1958; hosted scan)",
     "quote": "4 Mev proton",
     "short": "p (intended)"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "internal target, a change to r-f deflection under consideration (design)",
     "src": "/library/classics/ornl-2644/ — printed p. 119 (X-882 data sheet supplied by W. H. Bancroft, Jr., June 1958; hosted scan)",
     "quote": "internal (considering change to r-f def.)"
    },
    "design_energy_note": "4 MeV proton design target; the 1958 sheet's performance page is blank, a 1959 college-paper account describes the completed machine as operational, and no performance record survives",
    "dee_voltage_kv": {
     "v": 50,
     "note": "design maximum",
     "src": "/library/classics/ornl-2644/ — printed p. 119 (X-882 data sheet supplied by W. H. Bancroft, Jr., June 1958; hosted scan)",
     "quote": "Dee-to-dee, max 50 kv",
     "tier": "design"
    },
    "rf_power_w": {
     "v": 3000,
     "note": "oscillator maximum output, four 304TL tubes (design)",
     "src": "/library/classics/ornl-2644/ — printed p. 119 (X-882 data sheet supplied by W. H. Bancroft, Jr., June 1958; hosted scan)",
     "quote": "Osc. output, max 3 kw",
     "tier": "design"
    },
    "ion_source": {
     "text": "Oak Ridge type (design)",
     "src": "/library/classics/ornl-2644/ — printed p. 119 (X-882 data sheet supplied by W. H. Bancroft, Jr., June 1958; hosted scan)",
     "quote": "Ion source, type Oak Ridge"
    },
    "cost_note": "est. $120,000 total, most materials donated by local industry (1958 sheet)"
   },
   "directory_id": "howard-college-16-inch-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#howard-1948"
  },
  {
   "id": "fort-wayne-1951",
   "name": "Fort Wayne High School Cyclotron",
   "builders": "Three high-school students, Fort Wayne, Indiana",
   "country": "USA",
   "years": {
    "start": 1951,
    "first_beam": null,
    "label": "1951"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {},
   "summary": "In 1951 three students remodeled their high-school basement into a cyclotron laboratory and were already at work on the accelerator by the time the principal found out. The group kept careful engineering notes that later amateur builders cite as an early blueprint, and two of the students went on to work at Fermilab. No surviving documentation confirms whether the machine ultimately accelerated ions.",
   "links": [
    {
     "label": "Symmetry: The do-it-yourself cyclotron (2010)",
     "url": "https://www.symmetrymagazine.org/article/august-2010/do-it-yourself-cyclotron"
    }
   ],
   "compare": {
    "builder_type": "high-school",
    "magnet": null,
    "size": null,
    "field_t": null,
    "rf_mhz": null,
    "vacuum": null,
    "particle": null,
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented"
    },
    "design_energy_note": null,
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": null
   },
   "directory_id": "fort-wayne-hs-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#fort-wayne-1951"
  },
  {
   "id": "iowa-state-1954",
   "name": "Iowa State University Undergraduate Cyclotron",
   "builders": "Undergraduate Physics Club, Iowa State University, Ames — original group led by Clark M. Varnum, advised by D. E. Hudson; later student generations through at least 1963",
   "country": "USA",
   "years": {
    "start": 1954,
    "first_beam": 1957,
    "label": "1954 – at least 1963"
   },
   "status": "operated",
   "energy_badge": "1.5 MeV",
   "specs": {
    "Pole diameter": "254 mm (10 in) faces, tapered from 12 in stems",
    "Field": "1.7 T (17,000 gauss)",
    "RF frequency": "25.68 MHz, 2 kW",
    "Dee voltage": "10–12 kV dee-to-dee operating; spec table says 10–14 kV",
    "Particle": "protons",
    "Energy": "1.5 MeV",
    "Beam current": "2 µA typical; beams up to 10 µA produced"
   },
   "summary": "A 2.5-ton, 10-inch cyclotron built by Iowa State undergraduates, begun in fall 1954 as a joint project of the Undergraduate Physics Club and the Physics Department laboratory program and first run in spring 1957. It accelerated protons to 1.5 MeV at 2 µA and served a sustained teaching program — undergraduate laboratories, NSF Undergraduate Research Participation, two master's theses, and nuclear work including N-13 production from carbon for half-life measurement. Four Iowa Academy of Science papers document it (McGuire on the machine, Burns on the experimental program, Mueller and Moses on orbit calculations, 1961–1963). McGuire's own scoped claim: 'the first operating “small” machine known to the author which was large enough for serious work in nuclear physics and which at the same time was built and manned essentially by undergraduates.' The machine's fate after 1963 is undocumented.",
   "links": [
    {
     "label": "McGuire, The Iowa State University 1.5 Mev Undergraduate Cyclotron (1961)",
     "url": "https://scholarworks.uni.edu/pias/vol68/iss1/65/"
    },
    {
     "label": "Burns, Experimental Program with the ISU Undergraduate 1.5 Mev Cyclotron (1961)",
     "url": "https://scholarworks.uni.edu/pias/vol68/iss1/66/"
    },
    {
     "label": "Mueller, Proton Orbit Calculations for the ISU Cyclotron (1961)",
     "url": "https://scholarworks.uni.edu/pias/vol68/iss1/67/"
    },
    {
     "label": "Moses, Proton Orbits in a Small Cyclotron (1963)",
     "url": "https://scholarworks.uni.edu/pias/vol70/iss1/67/"
    }
   ],
   "compare": {
    "builder_type": "undergraduate",
    "magnet": {
     "kind": "built",
     "desc": "Student-built: 33-inch coils of hollow water-cooled copper tubing on a two-ton mild-steel core, 12-inch pole stems tapered to 10-inch faces with a 0.7-inch shoulder; 20 kW from two motor-generator sets; materials donated by industry",
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — magnet section, p. 478",
     "quote": "coils of hollow copper tubing wound on a two-ton core of mild steel"
    },
    "size": {
     "mm": 254,
     "measure": "pole",
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — magnet section, p. 478",
     "quote": "tapered from 12-inch pole stems to 10-inch pole faces"
    },
    "field_t": {
     "v": 1.7,
     "note": "spec-table value of the operating machine. The companion Burns paper documents the measurement chain — magnet current on a Type K potentiometer across a 0.0005 Ω manganin shunt, correlated with a nuclear-resonance gaussmeter, 'accurate and reproducible to better than four gauss out of 17,000' (Burns 1961, p. 484) — and its figures give the exact-resonance field at 25.68 MHz as B₁ = 16,830 gauss (p. 486), matching f = qB/2πm to 0.1%",
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — magnet section p. 477 and Table 1 p. 481",
     "quote": "a large electro-magnet capable of producing a very uniform 17,000 gauss field",
     "tier": "reported"
    },
    "rf_mhz": {
     "v": 25.68,
     "note": "crystal-derived: quadrupled from the 6.417 Mc output of a war-surplus Command transmitter; two 833 tubes in push-pull. Burns 1961 (p. 484): frequency 'measured to five significant figures with a BC-221 frequency standard'",
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — RF section, p. 479",
     "quote": "Their output power is two kilowatts at a frequency of 25.68 megacycles per second",
     "tier": "operating"
    },
    "vacuum": null,
    "particle": {
     "text": "protons (hydrogen on a tungsten filament source)",
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — Table 1, p. 481",
     "quote": "Projectiles: protons",
     "short": "p"
    },
    "energy_kev": {
     "v": 1500,
     "note": "the paper's stated capability and spec-table maximum; method of determination not stated. Self-consistent: 1.5 MeV at 1.7 T is a 10.4 cm orbit radius inside the 12.7 cm pole radius",
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — p. 475 and Table 1, p. 481",
     "quote": "a machine capable of accelerating protons to an energy of 1.5 million electron volts",
     "tier": "reported"
    },
    "current": {
     "text": "≈2 µA typical maximum (≈10¹³ protons/s); beams as high as 10 µA produced",
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — performance section, p. 480-481",
     "quote": "The ISU cyclotron presently produces a maximum beam current of about two microamperes. (Beams as high as ten microamperes have been produced.)",
     "short": "2 µA (10 µA peak)"
    },
    "first_beam_year": 1957,
    "extraction": {
     "text": "none documented — internal target between the dees at full radius",
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — target section, p. 480",
     "quote": "The target is the material sample in which the nuclear reactions take place. It is placed between the dees"
    },
    "design_energy_note": null,
    "dee_voltage_kv": {
     "v": 11,
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — RF section p. 479 (operating range 10-12 kV; Table 1 p. 481 gives 10,000 to 14,000 volts dee-to-dee)",
     "quote": "Normal operating voltage on the dees is 10-12 kilovolts"
    },
    "rf_power_w": {
     "v": 2000,
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — RF section, p. 479",
     "quote": "Their output power is two kilowatts at a frequency of 25.68 megacycles per second"
    },
    "ion_source": {
     "text": "spirally-wound tungsten filament, non-inductively wound against magnetic forces; hydrogen fed near the incandescent filament",
     "src": "https://scholarworks.uni.edu/pias/vol68/iss1/65/ — ion source section, p. 480",
     "quote": "The ion source consists of a spirally-wound tungsten filament."
    },
    "cost_note": "materials contributed by industrial firms — Bethlehem Steel, Collins Radio, RCA, Northwestern Bell of Ames, Ampex; McGuire's paper supported by a Ramo-Wooldridge grant"
   },
   "directory_id": "iowa-state-undergraduate-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#iowa-state-1954"
  },
  {
   "id": "svoboda-1955",
   "name": "Svoboda Cyclotron",
   "builders": "Carl Svoboda, 15, Oakland, California",
   "country": "USA",
   "years": {
    "start": 1955,
    "first_beam": null,
    "label": "1955"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {},
   "summary": "A press photograph is the whole surviving record: on 10 March 1955 a Bettmann photographer shot 15-year-old Carl Svoboda 'performing an experiment with a cyclotron (center) he built himself' for about $300 — 'a far cry from the $9,500,000 betatron at the University of California, but an atom-smasher just the same,' the caption says. Contemporary photographic documentation of a completed apparatus, and nothing more: no species, no beam result, no later history. A reader's comment on a 2020 accelerator-history article points to a surviving personal archive — a lead, not a record. Distinct from the El Cerrito High School build across the bay eight years earlier.",
   "links": [
    {
     "label": "Bettmann/Getty press photograph and caption, 10 March 1955",
     "url": "https://www.gettyimages.ae/detail/news-photo/boy-with-a-cyclotron-oakland-california-young-carl-svoboda-news-photo/515256936"
    }
   ],
   "compare": {
    "builder_type": "individual",
    "magnet": null,
    "size": null,
    "field_t": null,
    "rf_mhz": null,
    "vacuum": null,
    "particle": null,
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented",
     "src": "https://www.gettyimages.ae/detail/news-photo/boy-with-a-cyclotron-oakland-california-young-carl-svoboda-news-photo/515256936"
    },
    "design_energy_note": null,
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": "≈$300, per the contemporary caption"
   },
   "directory_id": "svoboda-oakland-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#svoboda-1955"
  },
  {
   "id": "central-high-1958",
   "name": "Central High School Cyclotron",
   "builders": "Successive student teams (L. Zuckerman, N. Ostroff, J. Horowitz and others; later S. Goldwasser and others), Central High School, Philadelphia",
   "country": "USA",
   "years": {
    "start": 1958,
    "first_beam": null,
    "label": "1958 – c. 1970"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {
    "Pole diameter": "178 mm (7 in)",
    "Field": "≈2 T (20 kG), a builder’s later estimate; never measured",
    "RF frequency": "≈7 MHz initially, later ≈20 MHz",
    "Particle": "protons (intended)",
    "Energy": "≈1 MeV theoretical; no measured beam"
   },
   "summary": "A cyclotron built and rebuilt by roughly three generations of Philadelphia high-school students between 1958 and about 1970, documented in a detailed retrospective by one of the later participants. The 7-inch machine was theoretically capable of about 1 MeV, but the account itself doubts a real proton beam was ever achieved; the best evidence of operation was a marginal exposure of dental X-ray film.",
   "links": [
    {
     "label": "The Central High School Cyclotron (repairfaq.org)",
     "url": "https://www.repairfaq.org/sam/other/chscyc.htm"
    }
   ],
   "compare": {
    "builder_type": "high-school",
    "magnet": {
     "kind": "donated",
     "desc": "6-ton resistive electromagnet, 7 in poles, on a 99-year $1 lease; lessor recalled variously as GE or the University of Pennsylvania physics dept (unused magnet donated via faculty contacts)",
     "src": "https://www.repairfaq.org/sam/other/chscyc.htm — 'The magnet' section; Zuckerman and Ostroff emails",
     "quote": "The magnet was on a 99 year lease for $1 from some company, maybe GE"
    },
    "size": {
     "mm": 178,
     "measure": "pole",
     "src": "https://www.repairfaq.org/sam/other/chscyc.htm — Introduction",
     "quote": "The diameter of the magnet pole pieces were 7 inches!"
    },
    "field_t": {
     "v": 2,
     "note": "author's guess after upgrading the magnet supply to ~1-2 kV; never measured ('student and hammer method')",
     "src": "https://www.repairfaq.org/sam/other/chscyc.htm — 'The magnet' section",
     "quote": "it probably was running near the 20,000 (2 Tesla) limit of an iron core magnet",
     "tier": "estimate"
    },
    "rf_mhz": {
     "v": 20,
     "note": "recollection for the third-generation (1966-70) rebuild; first-generation calculation was ~7 MHz for the weaker original field",
     "src": "https://www.repairfaq.org/sam/other/chscyc.htm — 'The RF source' and Zuckerman thread",
     "quote": "generated the RF (about 20 MHz if I recall correctly) for the 'Ds'",
     "tier": "estimate"
    },
    "vacuum": {
     "text": "at least 1e-6 torr (ion gauge, distrusted); glass oil diffusion pump + Sargent-Welch rotary vane, no baffle or trap",
     "src": "https://www.repairfaq.org/sam/other/chscyc.htm — 'The vacuum system'",
     "quote": "The vacuum system would do at least 10 -6 Torr when it was cooperating.",
     "short": "≤10⁻⁶ torr"
    },
    "particle": {
     "text": "protons (intended)",
     "src": "https://www.repairfaq.org/sam/other/chscyc.htm — 'What is a Cyclotron?' / Zuckerman thread",
     "quote": "I rather doubt any real proton beam from this machine would have had enough power to make a mark",
     "short": "p (intended)"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented",
     "src": "https://www.repairfaq.org/sam/other/chscyc.htm"
    },
    "design_energy_note": "≈1 MeV theoretical maximum 'if everything was optimal'; no measured beam — best evidence a marginal dental X-ray film exposure (c. 1966-70) and an unexplained mark on the chamber wall after the 1958-59 test",
    "dee_voltage_kv": null,
    "rf_power_w": {
     "v": 1000,
     "src": "https://www.repairfaq.org/sam/other/chscyc.htm — 'The RF source'",
     "quote": "I later built a 1 kW linear amp (from the AARL Handbook) using an EIMAC 3-400Z"
    },
    "ion_source": {
     "text": "simple source, type not stated; run at the edge of usable pressure",
     "src": "https://www.repairfaq.org/sam/other/chscyc.htm — Zuckerman thread (Sam)",
     "quote": "The most dodgy thing was probably the ion source due to its simplicity"
    },
    "cost_note": "magnet on a 99-year $1 lease; project funded by the Heart Association of Southeast Pennsylvania; diffusion pump donated (EIMAC per Zuckerman, Varian per Ostroff); machine-shop work donated"
   },
   "directory_id": "central-high-school-philadelphia",
   "url": "https://cyclotroninfo.com/builds/#central-high-1958"
  },
  {
   "id": "beeuwkes-1958",
   "name": "Beeuwkes Electron Cyclotron",
   "builders": "Reinier Beeuwkes III, 17, Newton High School, Massachusetts",
   "country": "USA",
   "years": {
    "start": 1958,
    "first_beam": null,
    "label": "1958"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {},
   "summary": "The machine that won the 1958 Westinghouse Science Talent Search — and the census's one documented electron cyclotron. The official winners booklet lists 'Design and Construction of an Electron Cyclotron'; Popular Electronics ran the photograph that July: 'He designed and built this cyclotron for accelerating electrons to high speeds. It cost less than $150, and is only as complex “as a radio,” he says, but it netted the 17-year-old Newton, Mass., lad a $7500 science scholarship.' TIME's account gives $121. No operating figures, achieved energy, or technical description survives in the located record — a classical cyclotron geometry accelerating electrons stays nonrelativistic only to a few keV, and what the machine actually demonstrated is exactly what the missing technical account would have said. Status is therefore unknown, on a machine good enough to win the country's top school science prize.",
   "links": [
    {
     "label": "1958 Science Talent Search winners booklet (project listing)",
     "url": "https://sspcdn.blob.core.windows.net/files/Documents/Alumni/STS/1958_Semifinalist_Book.pdf"
    },
    {
     "label": "Popular Electronics, July 1958, p. 34 (photo and account)",
     "url": "https://archive.org/stream/Pop195710/Popular%20Electronics/Pop-1958-07_djvu.txt"
    },
    {
     "label": "TIME, March 1958",
     "url": "https://time.com/archive/6800617/education-two-for-the-money/"
    }
   ],
   "compare": {
    "builder_type": "high-school",
    "magnet": null,
    "size": null,
    "field_t": null,
    "rf_mhz": null,
    "vacuum": null,
    "particle": {
     "text": "electrons",
     "src": "https://sspcdn.blob.core.windows.net/files/Documents/Alumni/STS/1958_Semifinalist_Book.pdf — Washington Trip Winners list, Massachusetts",
     "quote": "Design and Construction of an Electron Cyclotron",
     "short": "e⁻"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented",
     "src": "https://archive.org/stream/Pop195710/Popular%20Electronics/Pop-1958-07_djvu.txt"
    },
    "design_energy_note": null,
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": "under $150 (Popular Electronics); $121 (TIME)"
   },
   "directory_id": "beeuwkes-newton-electron-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#beeuwkes-1958"
  },
  {
   "id": "snu-1959",
   "name": "Seoul National University Cyclotron",
   "builders": "Graduate students and faculty, SNU physics department — the official account credits Kwon Young-dae and his students",
   "country": "South Korea",
   "years": {
    "start": 1959,
    "first_beam": null,
    "label": "1959–60"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {},
   "summary": "Korea's first domestically built accelerator, by the official account: the Korean Academy of Science and Technology's merit biography of physicist Kwon Young-dae states that in 1959 'Korea attempted for the first time to independently manufacture a cyclotron, and a proton beam was successfully extracted.' That extraction claim is a retrospective biography sentence, not a technical record — no measurement, collection point, or commissioning account survives in located sources, so the claim is reported here as the biography's and the status stays unknown. A 2025 builder memoir (mirrored online, not independently verified) describes a 20 cm chamber and a 2.5-ton magnet; a 1961 paper title reportedly gives the machine's designation as 1.5 MeV, and a 1962 companion paper on its vacuum chamber says 1 MeV — designations, not measurements. A funded graduate project rather than a hobby build; it enters this census the way the IUAC machine does, as a documented student-built machine with its scope stated plainly. The biography's own verdict: the machine was small and did not lead to sustained research, but showed a generation of students that experimental physics could be done in Korea.",
   "links": [
    {
     "label": "Korean Academy of Science and Technology merit biography: Kwon Young-dae",
     "url": "https://www.koreascientists.kr/scientists/merit/merit-list/?boardId=bbs_0000000000000028&category=2024&cntId=96&mode=view&pageIdx="
    }
   ],
   "compare": {
    "builder_type": "graduate",
    "magnet": null,
    "size": null,
    "field_t": null,
    "rf_mhz": null,
    "vacuum": null,
    "particle": {
     "text": "protons",
     "src": "https://www.koreascientists.kr/scientists/merit/merit-list/?boardId=bbs_0000000000000028&category=2024&cntId=96&mode=view&pageIdx=",
     "quote": "In 1959, Korea attempted for the first time to independently manufacture a cyclotron, and a proton beam was successfully extracted. [translated]",
     "short": "p"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "claimed in the official retrospective account; no technical record survives",
     "src": "https://www.koreascientists.kr/scientists/merit/merit-list/?boardId=bbs_0000000000000028&category=2024&cntId=96&mode=view&pageIdx=",
     "quote": "a proton beam was successfully extracted [translated]"
    },
    "design_energy_note": "1.5 MeV per a 1961 paper title, 1 MeV per a 1962 companion paper — designations from period literature leads, with no surviving measurement to choose between them",
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": null
   },
   "directory_id": "snu-seoul-1959-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#snu-1959"
  },
  {
   "id": "stuyvesant-1962",
   "name": "Stuyvesant High School Cyclotron",
   "builders": "Student Cyclotron Committee, Stuyvesant High School, New York City",
   "country": "USA",
   "years": {
    "start": null,
    "first_beam": null,
    "label": "early 1960s"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {},
   "summary": "Stuyvesant students organized a Cyclotron Committee with specialized teams for the electromagnet, vacuum chamber, and RF system, collecting donations that included a half-ton of steel and five miles of copper wire at a project cost of roughly $10,000. A 1962 school publication suggested the machine was completed, but a retrospective in the school's own newspaper found no evidence the project actually reached completion.",
   "links": [
    {
     "label": "The Stuyvesant Spectator retrospective",
     "url": "https://stuyspec.com/science/that-time-stuyvesant-students-built-a-particle-accelerator"
    }
   ],
   "compare": {
    "builder_type": "high-school",
    "magnet": {
     "kind": "built",
     "desc": "student-designed electromagnet from a donated half-ton of steel and five miles of copper wire",
     "src": "Stuyvesant Spectator retrospective (Shin, vol. 110 issue 1), paras 1–2",
     "quote": "the students received a half-ton of steel, five miles of copper wire ... one group designed the electromagnet"
    },
    "size": null,
    "field_t": null,
    "rf_mhz": null,
    "vacuum": {
     "text": "vacuum chamber built by a student sub-group; no pressure or pump stated",
     "src": "Stuyvesant Spectator retrospective, para 2",
     "quote": "one group designed the electromagnet, another created the vacuum chamber",
     "short": "unquantified"
    },
    "particle": null,
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented"
    },
    "design_energy_note": null,
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": "≈$10,000 after donations and fundraising, 1960s (Stuyvesant Spectator)"
   },
   "directory_id": "stuyvesant-hs-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#stuyvesant-1962"
  },
  {
   "id": "swank-1967",
   "name": "Swank First Cyclotron",
   "builders": "Albert Swank Jr., 17, with his father, Anchorage, Alaska",
   "country": "USA",
   "years": {
    "start": 1967,
    "first_beam": null,
    "label": "c. 1967"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {},
   "summary": "The teenage build behind the census-adjacent story everyone knows. Albert Swank Jr. reached national news in December 2005 for arranging to move a 20-ton Johns Hopkins medical cyclotron into his Anchorage home — and NPR's report notes, almost in passing, that the family building 'is the same building where he built a smaller cyclotron when he was 17,' his father working 'side by side with me while I was building my first cyclotron.' Swank was 55 at the time of the report, which puts the build around 1967 — an inference from the reported ages, not a documented date. Nothing else survives in the located record: no specifications, no beam result. The two machines are recorded separately — this entry is the 1960s build; the 2005 relocation project has its own record on the world map.",
   "links": [
    {
     "label": "NPR: Neighborhood Up in Arms Over Home Cyclotron (Dec 2005)",
     "url": "https://www.npr.org/2005/12/08/5044104/neighborhood-up-in-arms-over-home-cyclotron"
    }
   ],
   "compare": {
    "builder_type": "individual",
    "magnet": null,
    "size": null,
    "field_t": null,
    "rf_mhz": null,
    "vacuum": null,
    "particle": null,
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented",
     "src": "https://www.npr.org/2005/12/08/5044104/neighborhood-up-in-arms-over-home-cyclotron"
    },
    "design_energy_note": null,
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": null
   },
   "directory_id": "swank-anchorage-first-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#swank-1967"
  },
  {
   "id": "niell-1",
   "name": "Niell Cyclotron I",
   "builders": "Fred Niell (high-school student, home-built)",
   "country": "USA",
   "years": {
    "start": 1993,
    "first_beam": 1994,
    "label": "c. 1993–1994"
   },
   "status": "beam-demonstrated",
   "energy_badge": null,
   "specs": {
    "RF frequency": "resonance observed at 2.2–2.3 MHz — reported by the builder as roughly a tenth-order harmonic of the N₂ fundamental, not the fundamental itself",
    "Particle": "residual-air ions (mostly nitrogen)",
    "Vacuum": "small diffusion pump backed by a rotary pump"
   },
   "summary": "A cyclotron designed and built at home by a high-school student, set up in the room next to his bedroom, with every component — magnet, RF amplifier, vacuum gauges — of his own construction. Running on residual air rather than an isolated gas species, it demonstrated cyclotron mass resonance with a clear output peak at 2.2–2.3 MHz consistent with nitrogen ions and their harmonics. The associated science-fair project won the grand prize at the 1994 International Science and Engineering Fair.",
   "links": [
    {
     "label": "Fred's World of Science: Cyclotron I (archived, with build photos)",
     "url": "https://web.archive.org/web/20200630175247/http://www.niell.org/cyc1.html"
    },
    {
     "label": "Symmetry: The do-it-yourself cyclotron (2010)",
     "url": "https://www.symmetrymagazine.org/article/august-2010/do-it-yourself-cyclotron"
    }
   ],
   "compare": {
    "builder_type": "high-school",
    "magnet": {
     "kind": "built",
     "desc": "home-built electromagnet, milled and fully welded yoke, two self-wound coils (later found to total 1684 turns)",
     "src": "https://web.archive.org/web/20200630175247/http://www.niell.org/cyc1.html — photo captions",
     "quote": "The yoke was milled to strict tolerances, and each individual joint of the yoke was welded across the entire surface area of the joint"
    },
    "size": null,
    "field_t": null,
    "rf_mhz": {
     "v": 2.25,
     "note": "observed resonance peak 2.2–2.3 MHz; oscillator range 1–2.5 MHz",
     "src": "https://web.archive.org/web/20200630175247/http://www.niell.org/cyc1.html — Results",
     "quote": "at a frequency between 2.2 to 2.3 MHz, there is a significant increase in output from the cyclotron",
     "tier": "measured"
    },
    "vacuum": {
     "text": "small water-cooled diffusion pump backed by a Welch Duo-Seal, with molecular-sieve trap and home-built thermocouple gauge; no pressure figure given",
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — vacuum-system photo caption",
     "quote": "the essentials of the vacuum system used in the first and second cyclotrons ... Behind the old \"Duo-Seal\" ... On the left is the small diffusion pump.",
     "short": "unquantified"
    },
    "particle": {
     "text": "residual air, mostly N2+ (no isolated species)",
     "src": "https://web.archive.org/web/20200630175247/http://www.niell.org/cyc1.html — first photo caption",
     "quote": "This cyclotron only ran air (N2). I was unable to isolate any other species of ions for the experiments.",
     "short": "air (N₂⁺)"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": 1994,
    "extraction": {
     "text": "none documented",
     "src": "https://web.archive.org/web/20200630175247/http://www.niell.org/cyc1.html"
    },
    "design_energy_note": null,
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": null
   },
   "directory_id": "fred-niell-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#niell-1"
  },
  {
   "id": "niell-2",
   "name": "Niell Cyclotron II",
   "builders": "Fred Niell (high-school student, home-built)",
   "country": "USA",
   "years": {
    "start": 1994,
    "first_beam": 1995,
    "label": "1994–1995"
   },
   "status": "beam-demonstrated",
   "energy_badge": "≈70 keV",
   "specs": {
    "Field": "≈0.67 T (6.7 kG), calculated from turns, current and gap; not measured",
    "RF frequency": "0.5–16 MHz variable; H⁺ resonance observed at 10 MHz",
    "Particle": "protons, helium ions",
    "Energy": "≈70 keV computed for H⁺ at the observed resonance (r = 5.7 cm); not measured directly",
    "Vacuum": "diffusion pump with molecular-sieve trap"
   },
   "summary": "A second, more research-oriented machine built the following school year, fixing the shortcomings of the first: a variable-frequency RF system (0.5–16 MHz) driven by a tube push-pull amplifier allowed resonance mapping of more than one ion species. Measured resonance peaks for hydrogen and helium matched prediction within about 2% once the magnet coil count was corrected, corresponding to roughly 70 keV protons. The machine was left at the school when the builder went to college and was later dismantled for parts.",
   "links": [
    {
     "label": "Fred's World of Science: Cyclotron II (archived, with build photos)",
     "url": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html"
    },
    {
     "label": "Symmetry: The do-it-yourself cyclotron (2010)",
     "url": "https://www.symmetrymagazine.org/article/august-2010/do-it-yourself-cyclotron"
    }
   ],
   "compare": {
    "builder_type": "high-school",
    "magnet": {
     "kind": "built",
     "desc": "same home-built welded-yoke electromagnet as Cyclotron I, coils re-wired in series, 1684 turns total, 22.2 A, 69.85 mm gap",
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — Magnet System",
     "quote": "I should put the two coils in series ... The wire in the magnets, however cannot carry more than 22.2 A."
    },
    "size": {
     "mm": 178,
     "measure": "chamber-id",
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — Containment Vessel (7-inch glass end plates of the 'sandwich' chamber; pole diameter not stated; ion trajectory radius 0.05715 m = 57 mm; pole gap 0.06985 m)",
     "quote": "I decided to try out 7\" glass disks with my vessel."
    },
    "field_t": {
     "v": 0.6725,
     "note": "calculated from N·i/g with corrected turn count (1684 turns, 22.2 A, 0.06985 m gap); not directly measured",
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — Magnet System",
     "quote": "Hence: B = 0.6725 T; 6725 gauss at 22.2 A",
     "tier": "estimate"
    },
    "rf_mhz": {
     "v": 10,
     "note": "observed H+ resonance; He+ at 2.5 MHz, He2+ at 5.5 MHz; signal generator range 0.5–16 MHz into tube push-pull amplifier",
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — Calculations / High Voltage Power Supply",
     "quote": "f predicted = 10.229 MHz f observed = 10.000 MHz",
     "tier": "measured"
    },
    "vacuum": {
     "text": "≈1e-5 mmHg (torr) estimated, diffusion pump with molecular-sieve trap; thermocouple + mechanical bellows gauges",
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — Vacuum System",
     "quote": "The final pressure attained was estimated at 10 -5 mmHg.",
     "short": "≈10⁻⁵ torr"
    },
    "particle": {
     "text": "hydrogen (H+), helium (He+, He2+); magnesium attempted without a resonance point",
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — Results",
     "quote": "I have proven resonance with two gasses.",
     "short": "p, He⁺, He²⁺"
    },
    "energy_kev": {
     "v": 70.5,
     "note": "H+ at the observed 10 MHz resonance, computed for r = 5.715 cm and B = 0.6725 T (itself calculated); not measured directly",
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — Calculations",
     "quote": "KEmax = ½m(qBr/m)² ... 70.5 keV",
     "tier": "computed"
    },
    "current": null,
    "first_beam_year": 1995,
    "extraction": {
     "text": "none, by design (internal copper target plate at r = 5.7 cm)",
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — Ion Source and Target",
     "quote": "The target in the path of the ion beam was made of 18-gauge copper plate."
    },
    "design_energy_note": "≈70.5 keV H+ computed (KEmax = ½m(qBr/m)² at r = 0.05715 m, B = 0.6725 T); He+ 17.6 keV, He2+ 67.6 keV computed; original design target 99.69 keV at the assumed 2000 turns. Resonance was observed, but no energy was measured directly.",
    "dee_voltage_kv": {
     "v": 1.3,
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — High Voltage Power Supply",
     "quote": "The final output was 1300 volts at about 400 watts."
    },
    "rf_power_w": {
     "v": 400,
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — High Voltage Power Supply (RCA 811A push-pull, ~200 W per tube)",
     "quote": "The final output was 1300 volts at about 400 watts."
    },
    "ion_source": {
     "text": "thermionic nichrome heater coil on a borosilicate pipette, ~2.5 A; gas admitted through an inlet port (Mg strip substituted for the Mg run)",
     "src": "https://web.archive.org/web/20200630175252/http://www.niell.org/cyc2.html — Ion Source and Target",
     "quote": "The source of ions for the cyclotron was a thermionic heater. A 0.1-ohm coil of Nichrome wire was wound on a borosilicate glass pipette"
    },
    "cost_note": "hydrogen made by home electrolysis because a cylinder regulator (~$200) was unaffordable; helium from party-balloon tanks. (The Symmetry $125,000 figure is Niell's generic all-new-parts estimate, not this machine's cost.)"
   },
   "directory_id": "niell-cyclotron-ii",
   "url": "https://cyclotroninfo.com/builds/#niell-2"
  },
  {
   "id": "rutgers-9",
   "name": "Rutgers 9-Inch Cyclotron (prototype)",
   "builders": "Tim Koeth and Stu Hanebuth, undergraduates at Rutgers University",
   "country": "USA",
   "years": {
    "start": 1995,
    "first_beam": 1999,
    "label": "1995–1999"
   },
   "status": "beam-demonstrated",
   "energy_badge": null,
   "specs": {
    "Pole diameter": "229 mm (9 in), Varian V-3400 NMR magnet",
    "Field": "0.889 T (8.89 kG) operating; 1.2 T maximum",
    "RF frequency": "13.56 MHz",
    "Particle": "protons",
    "Energy": "≈184 keV computed at 7.0 cm radius (run 91699C); up to ≈50 nA proton current at the chamber periphery"
   },
   "summary": "The feasibility prototype for the later 12-inch machine, built around a repurposed Varian NMR magnet turned on its side, with a fixed 13.56 MHz industrial-band RF system setting the 0.889 T operating field. Successful resonance runs in 1999 showed a strong proton current at the predicted field, with beam detected at up to about 50 nA at the periphery. Its results justified moving to a 12-inch magnet with a 1 MeV design goal.",
   "links": [
    {
     "label": "Koeth cyclotron site: 9-inch prototype",
     "url": "http://koethcyclotron.org/?page_id=80"
    },
    {
     "label": "Photo gallery: 9-inch cyclotron",
     "url": "http://koethcyclotron.org/?page_id=239"
    },
    {
     "label": "Koeth cyclotron site (main)",
     "url": "http://koethcyclotron.org/"
    },
    {
     "label": "Rutgers 12-Inch Cyclotron: Dedicated to Training Through R&D (Cyclotrons2013, WEPPT024)",
     "url": "https://proceedings.jacow.org/CYCLOTRONS2013/papers/weppt024.pdf"
    }
   ],
   "compare": {
    "builder_type": "undergraduate",
    "magnet": {
     "kind": "surplus",
     "desc": "Varian V-3400 NMR magnet (H-frame), mounted sideways, new 9-inch pole tips machined from 1020 steel",
     "src": "http://koethcyclotron.org/?page_id=80 — '9 Inch Cyclotron Magnet' section",
     "quote": "The most accessible magnet was a Varian V-3400 NMR magnet. It is of the typical H-frame design."
    },
    "size": {
     "mm": 229,
     "measure": "pole",
     "src": "http://koethcyclotron.org/?page_id=80 — magnet section",
     "quote": "The poles are nine inches in diameter and create a gap of 2.1875 inches."
    },
    "field_t": {
     "v": 0.889,
     "note": "operating (set by the 13.56 MHz oscillator); 1.2 T maximum; measured beam peak at 0.885 T",
     "src": "http://koethcyclotron.org/?page_id=80 — magnet section and data-analysis section",
     "quote": "a magnetic field of 0.889 Tesla was determined to be the operating field value ... The measured ion peak at 0.885 Tesla",
     "tier": "operating"
    },
    "rf_mhz": {
     "v": 13.56,
     "note": "fixed industrial frequency; run 91699C tuned to 13.590 MHz",
     "src": "http://koethcyclotron.org/?page_id=80 — RF section",
     "quote": "the operating frequency is 13.56+0.03 MHz",
     "tier": "operating"
    },
    "vacuum": {
     "text": "routinely 1e-5 torr in ~30 min, <5e-6 torr in <2 h; optimum H2 operating pressure 5.5e-5 torr",
     "src": "http://koethcyclotron.org/?page_id=80 — vacuum and ion-source sections",
     "quote": "routinely be evacuated to 1E-5 Torr in approximately 30 minutes, and < 5E-6 Torr in less than 2 hours",
     "short": "≤5×10⁻⁶ torr"
    },
    "particle": {
     "text": "protons",
     "src": "http://koethcyclotron.org/?page_id=80 — data-analysis section",
     "quote": "a strong proton current developed at the magnetic field corresponding to the fr",
     "short": "p"
    },
    "energy_kev": {
     "v": 184,
     "note": "run 91699C parameter table: 'Max. Ion Energy 184 keV' at 'Max. Ion Radius 7.0 cm' — computed from radius and field, not a direct energy measurement",
     "src": "http://koethcyclotron.org/?page_id=80 — '9 Inch Cyclotron Data Analysis', run 91699C table",
     "quote": "Max. Ion Radius 7.0 cm Max. Ion Energy 184 keV",
     "tier": "computed"
    },
    "current": {
     "text": "up to 50 nA",
     "note": "internal; Faraday cup on a radial linear positioner, recorded while ramping the field; maximum limited by filament heating",
     "src": "http://koethcyclotron.org/?page_id=80 — RF section (beam loading note) and chamber section",
     "quote": "even under maximum ion current conditions of 50 nA no beam loading was noticed",
     "short": "≤50 nA"
    },
    "first_beam_year": 1999,
    "extraction": {
     "text": "none, by design (internal Faraday cup and phosphor screen; extraction deferred to the 12-inch)",
     "src": "http://koethcyclotron.org/?page_id=80 — discussion section",
     "quote": "after the twelve-inch system has proved operable, a tangential accessory vacuum port will be added with the intention to extract the proton beam"
    },
    "design_energy_note": null,
    "dee_voltage_kv": null,
    "rf_power_w": {
     "v": 16,
     "src": "http://koethcyclotron.org/?page_id=80 — run 91699C table (amplifier is a 100 W ENI350L)",
     "quote": "Forward RF Power 16 W"
    },
    "ion_source": {
     "text": "hot W-Th-Ir filament, biased −320 V, hydrogen via calibrated leak",
     "src": "http://koethcyclotron.org/?page_id=80 — ion-source section",
     "quote": "A W-Th-Ir filament is suspended between two electrical feed-throughs ... optimum bias voltage of the filament was 320 Volts D.C."
    },
    "cost_note": null
   },
   "directory_id": "rutgers-9-inch-prototype",
   "url": "https://cyclotroninfo.com/builds/#rutgers-9"
  },
  {
   "id": "rutgers-12",
   "name": "Rutgers 12-Inch Cyclotron",
   "builders": "Tim Koeth, Stu Hanebuth, and successive Rutgers undergraduates",
   "country": "USA",
   "years": {
    "start": 1995,
    "first_beam": null,
    "label": "1995–present"
   },
   "status": "operated",
   "energy_badge": "800 keV",
   "specs": {
    "Pole diameter": "305 mm (12 in)",
    "Field": "1.2 T (12 kG) design; 0.96 T average measured for the deuteron runs with spiral AVF pole tips",
    "RF frequency": "≈15.1 MHz measured tank resonance; 7.15 MHz for deuterons; 18.3 MHz design at 1.2 T. Note the deuteron pair 7.15 MHz / 0.96 T is ~2% off mutual consistency with f = qB/2πm (7.15 MHz ↔ ≈0.94 T) — both are recorded settings from the 2020 draft, not a validated matched pair",
    "Particle": "protons and deuterons (H₂⁺ also observed at reduced field)",
    "Energy": "800 keV, 200 nA demonstrated by 2006; 1 MeV capability; tens of µA after 2012 PIG source upgrade",
    "Extraction": "none — the 2009 electrostatic deflection channel (30 kV electrode, stainless septum) turns the beam onto an internal phosphor screen and is used as a velocity filter to measure beam energy",
    "Neutron production": "D–D fusion neutrons on a deuterated internal target, ≈5 × 10⁵ n/s during a 5 s continuous run; routine operation is long-pulsed at ≈10% duty factor"
   },
   "summary": "The best-documented amateur-origin cyclotron: begun as a personal project by two undergraduates in 1995, it became the centerpiece of the Rutgers modern physics teaching lab from 2001, reliably producing 800 keV proton beams by 2006 and, after a PIG ion source upgrade in 2012, tens of microamperes over 30-hour runs. It is also the census's most productive machine as an instrument: tuned for deuterons at 7.15 MHz and 0.96 T with spiral azimuthally-varying-field pole tips, it drives a deuterated internal target to produce D–D fusion neutrons at about 500,000 per second, calibrated against a NIST-traceable ²⁵²Cf source, and has been pulsed down to a 10 µs beam-on-target window to measure neutron diffusion time in a polyethylene moderator. Students have also attempted the ¹⁹F(p,αγ)¹⁶O reaction with fluorine internal targets and a field-insensitive gamma detector. Nineteen undergraduates gained hands-on accelerator experience on the machine, several going on to accelerator-physics careers. In 2016 it moved to the University of Maryland, where it anchors a capstone design class.",
   "links": [
    {
     "label": "Koeth cyclotron site",
     "url": "http://koethcyclotron.org/"
    },
    {
     "label": "Dedicated to Training Through R&D (Cyclotrons2013, WEPPT024)",
     "url": "https://proceedings.jacow.org/CYCLOTRONS2013/papers/weppt024.pdf"
    },
    {
     "label": "Beam physics demonstrations (Cyclotrons2013, WEPPT025)",
     "url": "https://proceedings.jacow.org/CYCLOTRONS2013/papers/weppt025.pdf"
    },
    {
     "label": "Photo gallery: 12-inch cyclotron",
     "url": "http://koethcyclotron.org/?page_id=284"
    },
    {
     "label": "Koeth group (University of Maryland)",
     "url": "https://koethgroup.umd.edu/cyclotron/"
    },
    {
     "label": "Terp Magazine: Beam Team",
     "url": "https://terp.umd.edu/beam-team"
    },
    {
     "label": "Nuclear Physics Lab: neutron diffusion time measurement (D–D neutrons on the 12-inch)",
     "url": "http://www.nuclearphysicslab.com/npl/npl-home/experiments/neutrons/neutron-diffusion-time-measurement/"
    },
    {
     "label": "Undergraduate Education with the Rutgers 12-Inch Cyclotron (CAARI 2014 / Physics Procedia 66, 2015)",
     "url": "http://www.nuclearphysicslab.com/npl/wp-content/uploads/CAARI_Koeth_Cyclotron_2.pdf"
    },
    {
     "label": "Tim's Cyclotron — the builder's thirty-year project history (timkoeth.com, 2026)",
     "url": "http://timkoeth.com/uncategorized/tims-cyclotron/"
    },
    {
     "label": "NPL: 12-Inch Cyclotron Papers (the authors' hosted collection)",
     "url": "http://www.nuclearphysicslab.com/npl/npl-home/accelerators/cyclotrons/12-inch-cyclotron-papers/"
    }
   ],
   "compare": {
    "builder_type": "undergraduate",
    "magnet": {
     "kind": "historic",
     "desc": "12-inch H-frame magnet, 4600 lb, formerly the first analyzing magnet of a 60-inch cyclotron's extracted beam; recovered 1998",
     "src": "http://koethcyclotron.org/?page_id=382 — '12\" Cyclotron Magnet'",
     "quote": "The 12 inch magnet came from another cyclotron lab, where it's roll was ... the first analyzing magnet of the extracted beam from the cyclotron."
    },
    "size": {
     "mm": 305,
     "measure": "pole",
     "src": "http://koethcyclotron.org/?page_id=382 — specs list",
     "quote": "Pole Diameter:12 inches (30cm)"
    },
    "field_t": {
     "v": 0.96,
     "tier": "measured",
     "note": "average field for the deuteron runs with AKG270 spiral pole tips; 1.2 T is the design maximum",
     "src": "http://www.nuclearphysicslab.com/npl/npl-home/experiments/neutrons/neutron-diffusion-time-measurement/",
     "quote": "an average magnetic field set to 0.96T … with the AKG270 spiral poletips"
    },
    "rf_mhz": {
     "v": 7.15,
     "tier": "operating",
     "note": "the deuteron runs, matching the 0.96 T field column (the pair is ~2% off f = qB/2πm, both recorded settings); the proton tank resonance measured 15.061 MHz on the bench (shifting to 14.777 MHz with probe; koethcyclotron.org 'RF Testing and Measurement'); 18.3 MHz is the design value at 1.2 T",
     "src": "http://www.nuclearphysicslab.com/npl/npl-home/experiments/neutrons/neutron-diffusion-time-measurement/",
     "quote": "The 12-inch cyclotron was tuned up for D+ ions, with the RF system tuned to 7.150MHz, for an average magnetic field set to 0.96T"
    },
    "vacuum": {
     "text": "as low as 9e-7 torr; high-1e-6 range in ~1 h from cold start (chamber page: 5e-7 torr)",
     "src": "http://koethcyclotron.org/?page_id=449 — '12\" Cyclotron Vacuum System'",
     "quote": "Pressures as low as 9E-7 have been reached, and from a cold start it takes approximately 1 hour to reach the high E-6 Torr range.",
     "short": "9×10⁻⁷ torr"
    },
    "particle": {
     "text": "protons and deuterons; H₂⁺ also observed at reduced field",
     "short": "p, d",
     "src": "http://www.nuclearphysicslab.com/npl/npl-home/experiments/neutrons/neutron-diffusion-time-measurement/",
     "quote": "The 12-inch cyclotron was tuned up for D+ ions, with the RF system tuned to 7.150MHz"
    },
    "energy_kev": {
     "v": 800,
     "note": "reliable operation by spring 2006 per the site's welcome page (method unstated); 500 keV protons separately verified on the phosphor screen behind the 2009 electrostatic deflector used as an E×B velocity filter",
     "src": "http://koethcyclotron.org/?page_id=52 — Welcome; http://koethcyclotron.org/?page_id=744 — Fig. 20 caption",
     "quote": "reliably producing 200 nA - 800keV proton beams ... Fig.20 500 keV protons hitting the screen.",
     "tier": "reported"
    },
    "current": {
     "text": "200 nA (2006); tens of µA after 2012 PIG source",
     "note": "internal beam; chamber carries a Faraday-cup ion collector on a radial positioner and phosphor screens; measurement method for the quoted figures not stated",
     "src": "http://koethcyclotron.org/?page_id=52 — Welcome; http://koethcyclotron.org/?page_id=437 chamber contents",
     "quote": "providing 10's of microamperes of beam on-time in excess of 30 hours without requiring maintenance",
     "short": "200 nA; tens of µA (2012+)"
    },
    "first_beam_year": null,
    "extraction": {
     "text": "none — beam is used on internal targets; the 2009 electrostatic deflection channel is a Wien filter onto an internal phosphor screen, and the deuterated neutron target sits on a linear feedthrough inside the chamber",
     "src": "http://koethcyclotron.org/?page_id=744 and http://www.nuclearphysicslab.com/npl/npl-home/experiments/neutrons/neutron-diffusion-time-measurement/",
     "quote": "It was not the intention of this project to extract the beam."
    },
    "design_energy_note": "1 MeV capability claimed (site: 'capable of producing 1 million electron volt (1 MeV) protons'); worked example 1.1 MeV at 1.2 T, 18.3 MHz, 5-inch radius. Highest stated measured figure is 800 keV.",
    "dee_voltage_kv": {
     "v": 9,
     "src": "http://koethcyclotron.org/?page_id=458 Fig. 8 caption and http://koethcyclotron.org/?page_id=470 (4,500 V above ground at 400 W = 9 kV p-p; record 18 kV p-p at 2000 W)",
     "quote": "The record input power level was 2000 watts, about 18kVp-p developed on the dee."
    },
    "rf_power_w": {
     "v": 2500,
     "src": "http://koethcyclotron.org/?page_id=458 — RF System (student mode ≤50 W; record run 2000 W)",
     "quote": "Currently a maximum of 2,500 Watts can be generated, however special cooling procedures must be followed."
    },
    "ion_source": {
     "text": "originally biased Th-W hot filament in a ceramic 'boat' with copper chimney and dee-mounted pullers; PIG source added 2012",
     "src": "http://koethcyclotron.org/?page_id=479, ?page_id=507, ?page_id=52",
     "quote": "Ions are produced in the center of the 12-inch cyclotron by the simple method employing a biased hot filament. ... In 2012, with the recent addition of the PIG ion …"
    },
    "cost_note": null,
    "resonance_species": "d"
   },
   "directory_id": "rutgers-12-inch",
   "url": "https://cyclotroninfo.com/builds/#rutgers-12"
  },
  {
   "id": "knox-2001",
   "name": "Knox College Cyclotron",
   "builders": "Jeff Smith, undergraduate at Knox College, Illinois",
   "country": "USA",
   "years": {
    "start": null,
    "first_beam": null,
    "label": "c. 1999–2001"
   },
   "status": "stalled",
   "energy_badge": null,
   "specs": {
    "Magnet": "the college NMR lab's nuclear magnetic resonance magnet, ≈20 cm diameter pole faces, maximum field 2 T",
    "Design energy": "1.5 MeV protons — the design point stated by the department, not a result",
    "Dees": "two copper dees on blocks of insulating dielectric, mounted so each could be moved independently",
    "Chamber": "0.48 cm thick brass; the top plate was held on by external air pressure alone, in the pattern Niell used",
    "RF system": "the NMR lab's radiofrequency sources and power amplifiers; dees operated at 3,750 V through a manually adjustable resonating circuit. The dees' capacitance was never measured — the circuit was tuned by trial and error",
    "Ion source": "coiled coated tungsten filament at the centre of the chamber, its electrons ionising low-pressure hydrogen; built to be completely removable because the builder judged it the design's weak point",
    "Vacuum": "15.2 cm (6 in) diameter diffusion pump; no pressure is published",
    "Feedthroughs": "nylon plugs, O-rings and brass screws held in place with Plumber's Goop; rubber stoppers drilled along their axes sealed the gas line and the Faraday collector",
    "Extraction": "an extractor system was designed around a negatively charged deflection plate; the machine also carried an insertable Faraday collector plate",
    "Outcome": "never successfully tested — the magnetic field moved the wires powering the ion source until they shorted the dees"
   },
   "summary": "A fixed-frequency cyclotron built as a senior honors project at Knox College, begun the summer before the builder's junior year on a Ford Fellowship and the Richter Fund, after he encountered cyclotrons at a Fermilab public lecture; Fermilab cyclotron builder Chris Olsen assisted. The department states the design point plainly: 1.5 MeV protons, using the 2 T magnet in the college's NMR lab along with that lab's RF sources and power amplifiers. Two independently movable copper dees sat on dielectric blocks inside a brass chamber whose top plate was held down by atmospheric pressure alone; the resonant circuit was tuned by trial and error because the dees' capacitance was never measured; a coiled tungsten filament at the centre ionised low-pressure hydrogen; and both a deflection-plate extractor and an insertable Faraday collector were built. It did not reach beam. A later undergraduate builder at Houghton College, surveying the amateur machines before starting his own, records the failure mode: the magnetic field moved the wires powering the ion source until they shorted the dees. The department's page says he “came very close to seeing beam before graduation rudely cut his project short” and that he left the machine ready for another student to finish; a 2010 account reports it still in the college basement, with one attempt at revival abandoned. The builder went on to a Cornell physics doctorate and to SLAC.",
   "links": [
    {
     "label": "Knox College Department of Physics: student projects (cyclotron section, with photographs)",
     "url": "https://departments.knox.edu/physicsdept/Projects/Projects.htm"
    },
    {
     "label": "Cressman, The Design and Construction of a Small Cyclotron (Houghton College, 2006) — §1.2.5 surveys this machine",
     "url": "https://dspace.houghton.edu/items/32d64ffe-51a4-49ca-9586-ce63687d061c"
    },
    {
     "label": "Symmetry: The do-it-yourself cyclotron (2010)",
     "url": "https://www.symmetrymagazine.org/article/august-2010/do-it-yourself-cyclotron"
    },
    {
     "label": "Builder profile (SETI Institute)",
     "url": "https://www.seti.org/people/jeffrey-smith/"
    }
   ],
   "compare": {
    "builder_type": "undergraduate",
    "magnet": {
     "kind": "lab-magnet",
     "desc": "the college NMR lab's nuclear magnetic resonance magnet, ~20 cm pole faces",
     "src": "Cressman 2006, The Design and Construction of a Small Cyclotron (B.S. thesis, Houghton College), §1.2.5, p. 18 [handle hc/3761]",
     "quote": "The magnet was a nuclear magnetic resonance magnet with a maximum field of 2 T and approximately 20 cm diameter pole faces."
    },
    "size": {
     "mm": 200,
     "measure": "pole",
     "src": "Cressman 2006, The Design and Construction of a Small Cyclotron (B.S. thesis, Houghton College), §1.2.5, p. 18 [handle hc/3761]",
     "quote": "approximately 20 cm diameter pole faces"
    },
    "field_t": {
     "v": 2,
     "tier": "design",
     "note": "the NMR magnet's stated maximum and the design field; the machine never ran, so no operating field exists",
     "src": "Cressman 2006, The Design and Construction of a Small Cyclotron (B.S. thesis, Houghton College), §1.2.5, p. 18 [handle hc/3761]; design point per https://departments.knox.edu/physicsdept/Projects/Projects.htm (Knox College Department of Physics, student projects; retrieved 2026-08-23)",
     "quote": "The magnet was a nuclear magnetic resonance magnet with a maximum field of 2 T"
    },
    "rf_mhz": null,
    "vacuum": {
     "text": "15.2 cm (6 in) diameter diffusion pump; no pressure published",
     "short": "unquantified",
     "src": "Cressman 2006, The Design and Construction of a Small Cyclotron (B.S. thesis, Houghton College), §1.2.5, p. 18 [handle hc/3761]",
     "quote": "A large 15.2 cm diameter diffusion pump was used to create the vacuum."
    },
    "particle": {
     "text": "protons, from low-pressure hydrogen ionised in the chamber",
     "short": "p",
     "src": "Cressman 2006, The Design and Construction of a Small Cyclotron (B.S. thesis, Houghton College), §1.2.5, p. 18 [handle hc/3761]",
     "quote": "the emitted electrons ionizing the low pressure hydrogen gas in the chamber"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "designed but never tested — an extractor system built around a negatively charged deflection plate; the machine never produced beam",
     "src": "Cressman 2006, The Design and Construction of a Small Cyclotron (B.S. thesis, Houghton College), §1.2.5, p. 18 [handle hc/3761]",
     "quote": "An extractor system was designed with a negatively charged deflection plate"
    },
    "design_energy_note": "Designed for 1.5 MeV protons using the NMR lab's 2 T magnet (Knox College physics department). No beam was produced, so no energy is listed here. The dees were operated at 3,750 V into a resonating circuit tuned by trial and error, the dees' capacitance never having been measured.",
    "dee_voltage_kv": {
     "v": 3.75,
     "src": "Cressman 2006, The Design and Construction of a Small Cyclotron (B.S. thesis, Houghton College), §1.2.5, p. 18 [handle hc/3761]",
     "quote": "The dees were operated at 3,750 V, using a manually adjustable resonating circuit."
    },
    "rf_power_w": null,
    "ion_source": {
     "text": "coiled coated tungsten filament at the chamber centre, made completely removable because the builder judged it the weak point of the design",
     "src": "Cressman 2006, The Design and Construction of a Small Cyclotron (B.S. thesis, Houghton College), §1.2.5, p. 18 [handle hc/3761]",
     "quote": "The ion source was a coiled coated tungsten filament mounted in the center of the chamber"
    },
    "cost_note": null
   },
   "directory_id": "knox-college-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#knox-2001"
  },
  {
   "id": "houghton-2003",
   "name": "Houghton College Cyclotron",
   "builders": "Mark Yuly and successive undergraduate students, Houghton College, New York",
   "country": "USA",
   "years": {
    "start": 2001,
    "first_beam": 2007,
    "label": "2001–present"
   },
   "status": "beam-demonstrated",
   "energy_badge": "≈157 keV",
   "specs": {
    "Chamber": "170 mm (6.7 in) inner-diameter aluminium chamber (a post-2008 replacement for the original 149 mm brass ring)",
    "Field": "≈1.1 T (11 kG)",
    "Particle": "protons, deuterons, helium ions",
    "Energy": "≈157 keV computed at the highest-frequency run (12.13 MHz, 796 mT, 2013); nanoamp-scale internal beams routine, ≈100 nA peak",
    "Vacuum": "diffusion-pumped high-vacuum system",
    "Beam current": "nanoamp-scale routine; ≈100 nA peak (2013); ≈20 nA deuterons (2022)"
   },
   "summary": "A deliberately small cyclotron developed as a continuing undergraduate research program begun in 2001, with each student generation documenting improvements in theses and conference talks — the college repository holds roughly twenty of them. It first accelerated hydrogen ions in 2007 and has since run protons, H₂⁺, helium and, in 2022, deuterons; the deuteron run produced a detected D(d,n)³He neutron signal. Beam currents are nanoamp-scale, peaking near 100 nA, and hardware failures have repeatedly interrupted operation. It hosted the first amateur cyclotron conference in 2010 and remains a teaching and research tool.",
   "links": [
    {
     "label": "Houghton College cyclotron papers (institutional repository)",
     "url": "https://dspace.houghton.edu/items/97513cba-fa4d-4228-9deb-7b6a79a5f11e"
    },
    {
     "label": "Physics Procedia: The Houghton College Cyclotron (2015)",
     "url": "https://www.sciencedirect.com/science/article/pii/S1875389215002369"
    }
   ],
   "compare": {
    "builder_type": "undergraduate",
    "magnet": {
     "kind": "lab-magnet",
     "desc": "GMW Associates 3473-70 commercial water-cooled electromagnet, 15 cm poles, acquired spring 2005",
     "src": "Loucks 2007 thesis PDF (dspace.houghton.edu item 97513cba…, bitstream bf636d59…), §3.2 Magnet, p.36; §1.2.3 p.15",
     "quote": "The magnet used for the Houghton College cyclotron is a GMW Associates 3473-70 Electromagnet, which has a pole diameter of 15 cm."
    },
    "size": {
     "mm": 150,
     "measure": "pole",
     "src": "Loucks 2007 thesis, §3.2 p.36 (abstract says 15.3 cm; Cressman 2006 abstract says 15.2 cm)",
     "quote": "a pole diameter of 15 cm. Using a PowerTen R62B-4050 power supply at 50 A, the maximum magnetic field with a pole separation of 3.85 cm is 1.1 T"
    },
    "field_t": {
     "v": 0.796,
     "tier": "operating",
     "note": "the field of the 12.13 MHz run that gives the energy figure (2013); the magnet's maximum with the 2022 supply is 1.13 T (Bowman 2022 thesis, §3 Magnet, p.28: 'this magnet can generate a maximum field of 1.13 T')",
     "src": "Fuller 2013 thesis PDF (dspace.houghton.edu item 67443019…), §4.5 p.54",
     "quote": "At present, the highest RF frequency achieved is 12.13 MHz. At this frequency, the H+ resonance should be at 796 mT"
    },
    "rf_mhz": {
     "v": 12.13,
     "note": "highest operating frequency with beam as of 2013; early runs 3.5–3.7 MHz, 5.831 MHz in 2022 D-D run; tunable source 2–15 MHz",
     "src": "Fuller 2013 thesis PDF (dspace.houghton.edu item 67443019…), §4.5 p.54",
     "quote": "At present, the highest RF frequency achieved is 12.13 MHz. At this frequency, the H+ resonance should be at 796 mT",
     "tier": "operating"
    },
    "vacuum": {
     "text": "≈1e-6 torr base (rotary forepump + Innovac R220 diffusion pump + LN2 cold trap); runs at ≈1e-5 to 1e-4 torr with gas admitted",
     "src": "Loucks 2007 thesis §3.3 p.38–39; Fuller 2013 §4.1 p.47",
     "quote": "an Innovac R220 diffusion pump and Kurt J Lesker TNR6XA150QF cold trap are used, which can lower the pressure to about 10-4 Pa (10-6 torr)",
     "short": "≈10⁻⁶ torr base"
    },
    "particle": {
     "text": "protons, H2+, He+ (and deuterons in the 2022 D-D run)",
     "src": "Haas 2009 thesis PDF (dspace.houghton.edu item b478d3c4…), Conclusions p.~77; Bowman 2022 abstract",
     "quote": "the Houghton College cyclotron successfully accelerated He+, H2+, and H+ ions. Currents of up to 2 nA were obtained with energies up to 9.2 keV for protons.",
     "short": "p, H₂⁺, He⁺, d"
    },
    "energy_kev": {
     "v": 157,
     "note": "highest-energy run to date (2013): H+ resonance at 12.13 MHz / 796 mT, beam current observed; energy inferred from the resonance field and collector radius, not independently measured. Earlier: 9.2 keV protons (2009), 4.8 keV deuterons at 5.54 cm (2022)",
     "src": "Fuller 2013 thesis, §4.5 p.54 and Fig. 33 caption",
     "quote": "Figure 33. Beam current at 12.13 MHz. This is the highest energy run to date. … at a maximum energy of 157 keV.",
     "tier": "computed"
    },
    "current": {
     "text": "≈100 nA peak (highest recorded); typically pA to a few nA; ≈20 nA deuterons in 2022",
     "note": "internal, brass collector plate read by Keithley 617 electrometer; the 100 nA peak was at the H2+/3 resonance (149 mT, 3.62 MHz, 2000 Vpp, ~1e-4 torr)",
     "src": "Fuller 2013 thesis, §4.1 p.47",
     "quote": "The run with only hydrogen, at a frequency of 3.62 MHz and dee voltage of 2000 Vpp with the filament floating at -90 V, showed close to a 100 nA …",
     "short": "nA-scale; 100 nA peak"
    },
    "first_beam_year": 2007,
    "extraction": {
     "text": "none, by design — internal collector and internal targets; single-dee/dummy-dee layout leaves space for extraction but none built",
     "src": "Haas 2009 thesis §3.2 p.51; Loucks 2007 §1.2.3 p.15 (neutrons to pass through chamber wall)",
     "quote": "frees up space within the chamber to be used for beam extraction or internal targets. In this cyclotron, the dummy dee is held at ground"
    },
    "design_energy_note": "anticipated 280 keV p / 140 keV d / 70 keV He (2007); 317 keV p 'currently capable', 400 keV with better magnet supply (2013 abstract, theoretical); 360 keV p theoretical with strong-focusing pole tips (2024); simulated 900 keV with steel lids (2015)",
    "dee_voltage_kv": {
     "v": 2,
     "src": "Fuller 2013 thesis §4.1 p.47 (2000 Vpp ≈ ±1 kV); Bowman 2022 p.~27 reports 3000 Vpp at 19.34 MHz tune; 840 Vpp in 2007 first run; dee withstood 3500 V open-air test (Loucks §4.1)",
     "quote": "dee voltage of 2000 Vpp with the filament floating at -90 V"
    },
    "rf_power_w": {
     "v": 100,
     "src": "Bowman 2022 thesis, §3 RF system p.~25",
     "quote": "Kalmus model 155LCRH RF power amplifier with a maximum power output of 100 W and a frequency range of 0.1 to 10MHz"
    },
    "ion_source": {
     "text": "hot-filament electron-bombardment source between dee and dummy dee (AEI EM-6 electron-microscope filament, ~2 A, floated at −100 V), gas fed via needle valve",
     "src": "Loucks 2007 thesis §3.5.2 p.45–46",
     "quote": "the gas is ionized by a hot filament cathode from an AEI type EM-6 electron microscope. The filament is mounted between the dee and the dummy dee"
    },
    "cost_note": null
   },
   "directory_id": "houghton-college-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#houghton-2003"
  },
  {
   "id": "mit-2007",
   "name": "MIT 2 MeV Cyclotron Project",
   "builders": "Leslie Dewan, undergraduate at MIT",
   "country": "USA",
   "years": {
    "start": null,
    "first_beam": null,
    "label": "c. 2006–2007"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {
    "Particle": "protons",
    "Energy": "2 MeV (design)"
   },
   "summary": "An undergraduate thesis project documenting the design and construction of a cyclotron intended to accelerate protons to 2 MeV for low-energy beam experiments in MIT's nuclear engineering department. The thesis and two videos are the surviving public record; no demonstrated beam is documented, and the project appears not to have been completed.",
   "links": [
    {
     "label": "MIT thesis (DSpace@MIT)",
     "url": "https://dspace.mit.edu/handle/1721.1/41681"
    },
    {
     "label": "Project video (YouTube)",
     "url": "https://www.youtube.com/watch?v=Yd-i9YU_xZQ"
    },
    {
     "label": "Project video, part 2 (YouTube)",
     "url": "https://www.youtube.com/watch?v=1JmpU5ChaoA"
    }
   ],
   "compare": {
    "builder_type": "undergraduate",
    "magnet": {
     "kind": "lab-magnet",
     "desc": "Varian V-3900 electromagnet (Varian Analytical Instrument Division), 8 cm pole radius, 1.25 in gap; provenance not stated",
     "src": "Dewan 2007 S.B. thesis PDF (dspace.mit.edu 1721.1/41681, bitstream f479ca4b…), 'Magnet' section p.6–7 and Fig. 3",
     "quote": "This cyclotron's magnetic field is produced using a Varian V-3900 magnet."
    },
    "size": {
     "mm": 160,
     "measure": "pole",
     "src": "Dewan 2007 thesis, p.7 (pole radius 8 cm → 160 mm diameter)",
     "quote": "The existing pole pieces have an 8 cm radius and a separation gap of 1.25 inches."
    },
    "field_t": {
     "v": 2.7,
     "note": "design (from the Varian manual curve at 1.25 in gap); never reported as measured with beam",
     "src": "Dewan 2007 thesis, p.6 Fig. 3 discussion",
     "quote": "the magnet generates 2.7 T of magnetic field with a 1.25 inch pole separation",
     "tier": "design"
    },
    "rf_mhz": {
     "v": 15.1,
     "note": "bench resonance of the inductor plus chamber as built (Q≈190); the thesis plans a retune to 41.2 MHz, which is what 2.7 T would require for protons. The two figures in this row are not an operating point — the machine never ran.",
     "src": "Dewan 2007 thesis, 'Tuning and testing the RF system' p.15 and Conclusions p.20",
     "quote": "The inductor and cyclotron chamber resonated at 15.1 MHz.",
     "tier": "bench"
    },
    "vacuum": {
     "text": "≈2e-3 torr achieved (Varian Turbo-V 70), judged adequate by mean-free-path estimate",
     "src": "Dewan 2007 thesis, 'Testing the Vacuum Chamber' p.11",
     "quote": "The vacuum chamber can be consistently pumped down to approximately 2*10-3 Torr.",
     "short": "2×10⁻³ torr (test)",
     "note": "achieved during testing and judged adequate by a mean-free-path estimate; the machine never ran, and this pressure would be marginal for a many-turn MeV design"
    },
    "particle": {
     "text": "protons (design)",
     "src": "Dewan 2007 thesis abstract (DSpace record)",
     "quote": "design and construction of a cyclotron capable of accelerating protons to 2 MeV",
     "short": "p (design)"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none, by design — internal target/detector at a fixed radius",
     "src": "Dewan 2007 thesis, p.7 and 'Vacuum Chamber Ports' p.11",
     "quote": "A detector positioned 7.34 centimeters from the center of the accelerator will intercept particles with energies of approximately 1.88 MeV"
    },
    "design_energy_note": "2 MeV protons (design; 1.96 MeV at 8 cm radius and 2.7 T, 1.88 MeV at the 7.34 cm detector). Never run: at thesis submission (May 2007) only the vacuum chamber and RF system had been tested; ion source and detector were untested for lack of hydrogen",
    "dee_voltage_kv": null,
    "rf_power_w": {
     "v": 100,
     "src": "Dewan 2007 thesis, Conclusions p.20 (arc test level, not an operating power)",
     "quote": "The RF system, which has a quality factor of 190, does not arc when subjected to 100 W pulses."
    },
    "ion_source": {
     "text": "hot-filament electron-impact source on hydrogen gas; negatively biased 'neodymium wire' filament, ~10 V across it, 22 Ω leads (untested at writing)",
     "src": "Dewan 2007 thesis, 'Ion Source' p.17–18 and Conclusions p.20",
     "quote": "the electrons flow from a negatively biased neodymium filament to the chamber ground"
    },
    "cost_note": null
   },
   "directory_id": "mit-dewan-2mev",
   "url": "https://cyclotroninfo.com/builds/#mit-2007"
  },
  {
   "id": "cyclotron-kids-2008",
   "name": "Cyclotron Kids 2 MeV Cyclotron",
   "builders": "Heidi Baumgartner and Peter Heuer (high-school students), with German Diagama; built at Jefferson Lab",
   "country": "USA",
   "years": {
    "start": 2006,
    "first_beam": null,
    "label": "c. 2006–2013"
   },
   "status": "stalled",
   "energy_badge": null,
   "specs": {
    "Dee diameter": "305 mm (12 in) single dee with grounded dummy dee",
    "Field": "1.6 T (16 kG) design target; the magnet was never power-tested",
    "RF frequency": "24 MHz design, 3 kW tube amplifier (a PlasmaTherm unit retuned from 13.56 MHz)",
    "Particle": "protons",
    "Energy": "2 MeV (design)",
    "Vacuum": "10⁻⁷ torr (design)"
   },
   "summary": "Two high-school students who met at a summer camp in 2006 set out to design a 2 MeV proton cyclotron (their 2013 conference paper gives no year for the decision to build; the project dates itself to 2006) and, after a funding email reached an associate director of Jefferson Lab, were invited to build it at the national lab; construction began in 2009 and ran over several summers. All components — a 1.6 T H-magnet, welded stainless chamber, 24 MHz RF system, and thermionic ion source — were completed, but lab safety rules for minors prevented power testing, and no beam was ever run. The machine was transferred to Old Dominion University to await further student work; both builders went on to physics careers.",
   "links": [
    {
     "label": "The Cyclotron Kids project site",
     "url": "https://thecyclotronkids.wordpress.com/"
    },
    {
     "label": "Project photo galleries",
     "url": "https://thecyclotronkids.wordpress.com/image-galleries/"
    },
    {
     "label": "Cyclotrons2013 paper (WE1PB05)",
     "url": "https://proceedings.jacow.org/CYCLOTRONS2013/papers/we1pb05.pdf"
    }
   ],
   "compare": {
    "builder_type": "high-school",
    "magnet": {
     "kind": "built",
     "desc": "1.6 T H-shaped electromagnet designed by the students from Jefferson Lab 1060 steel scrap; machined and wound by the JLab machine shop",
     "src": "WE1PB05 p.302, Electromagnet",
     "quote": "Jefferson Lab provided left over 1060 steel scrap, from which the 1.6 Tesla H-shaped electromagnet was designed. The Jefferson Lab machine shop then machined the pieces"
    },
    "size": {
     "mm": 305,
     "measure": "dee",
     "src": "WE1PB05 p.303, Vacuum Chamber and Component Layout",
     "quote": "There is one semicircular dee 12 inches in diameter, and a \"dummy dee,\" which is a grounded frame"
    },
    "field_t": {
     "v": 1.6,
     "note": "design (target); magnet never power-tested",
     "src": "WE1PB05 p.302, Electromagnet",
     "quote": "it was essential for achieving the target magnetic field strength of 1.6 Tesla",
     "tier": "design"
    },
    "rf_mhz": {
     "v": 24,
     "note": "design; amplifier modified from 13.56 MHz",
     "src": "WE1PB05 p.304, RF System",
     "quote": "3kW tube-based PlasmaTherm power amplifier modified for operation at 24 MHz from its original operating frequency of 13.56 MHz",
     "tier": "design"
    },
    "vacuum": {
     "text": "1e-7 torr (design) with hydrogen injection",
     "src": "WE1PB05 p.303, Vacuum Chamber and Component Layout",
     "quote": "keep a low vacuum pressure (10-7 torr) while injecting hydrogen into the chamber for a proton source",
     "short": "10⁻⁷ torr (design)"
    },
    "particle": {
     "text": "protons",
     "src": "WE1PB05 p.302, Target Energy",
     "quote": "This paper describes the design of their 2 MeV proton cyclotron.",
     "short": "p"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented (internal target on a linear-motion rod)",
     "src": "WE1PB05 p.303, Vacuum Chamber and Component Layout",
     "quote": "a linear motion feedthrough with a rod extending into the chamber. The target is mounted at the end of this rod."
    },
    "design_energy_note": "2 MeV target energy (design; no system ever power-tested, no beam)",
    "dee_voltage_kv": null,
    "rf_power_w": {
     "v": 3000,
     "src": "WE1PB05 p.304, RF System",
     "quote": "The cyclotron's radiofrequency system contains a 3kW tube-based PlasmaTherm power amplifier"
    },
    "ion_source": {
     "text": "thermionic filament in Macor base with chimney; hydrogen fed to the base",
     "src": "WE1PB05 p.304, Ion Source",
     "quote": "The ion source is a thermionic electron-emitting filament which is placed in a Macor base. A quarter-inch tube called a \"chimney\" sits on top"
    },
    "cost_note": "funded by Jefferson Lab; diffusion pump donated by Capitol Vacuum Parts (WE1PB05 p.302 Introduction; project site home page)"
   },
   "directory_id": "cyclotron-kids-2mev",
   "url": "https://cyclotroninfo.com/builds/#cyclotron-kids-2008"
  },
  {
   "id": "columbus-coburg-2013",
   "name": "COLUMBUS School Cyclotron",
   "builders": "Ch. Wolf, M. Frank, E. Held and students, Gymnasium Ernestinum, Coburg",
   "country": "Germany",
   "years": {
    "start": 2012,
    "first_beam": 2014,
    "label": "2012–present"
   },
   "status": "operated",
   "energy_badge": null,
   "specs": {
    "Pole diameter": "150 mm (6 in), Bruker BE-15 laboratory magnet",
    "Field": "0.187 T (1.87 kG) at the documented proton run; the 2022 table gives 185 mT for protons and 370 mT for H₂⁺; 0.38 T design point, up to 0.7 T available",
    "RF frequency": "2.82 MHz at 1000 V dee amplitude in the documented run; 5.63 MHz design. Since the matchbox was improved, two frequencies are selectable, 2.82 and 5.64 MHz (the 2022 paper's table gives the lower one as 2.85 MHz, its own text as 2.82)",
    "Particle": "protons and H₂⁺, identified by specific charge",
    "Energy": "Three published figures, and they are not the same quantity: 24–48 keV design (2013 paper), 8–16 keV as built (builders' 2020 book), and ~4.1 keV for protons / 7.5 keV for H₂⁺ in the 2022 technical-data table. Beam energy has never been measured — particles are identified by specific charge",
    "Vacuum": "10⁻⁶ mbar base and 10⁻⁵ mbar with hydrogen flowing in the 2022 technical data; the 2013 design paper's table gave 10⁻⁵ and 10⁻⁴ mbar",
    "Chamber": "200 mm (7.9 in) diameter × 75 mm high vacuum chamber, built free of charge by VACOM",
    "Ion source": "thermionic filament in a Macor chimney with puller electrodes on the dee; 7 A heating, 120 V anode, 2 mA emission, 0.10–0.15 ml/min hydrogen",
    "Detector": "home-built Faraday cup on a semi-rigid cable used as a radial guide rod; it reads a few pA to nA, but the experiment evaluates only whether a signal is present, not its magnitude"
   },
   "summary": "Built as a school project at the Gymnasium Ernestinum in Coburg with a 430 kg magnet and expertise from Forschungszentrum Jülich, which describes it as the first cyclotron built for school and teaching purposes in Europe. The builders date the project to 2012 and first beam to April 2014. Its 2013 conference paper sets out the design: a donated Bruker laboratory magnet, a 120 W marine-band transceiver as the RF source, a Koeth-pattern filament ion source, and a deliberate decision not to extract the beam so that no radiation can leave the experiment — a position the team has since revisited: in August 2021, with help from IBA in Belgium, they began building an extraction system to deflect the beam through a Wien filter and measure the ions' speed and energy against calculation. The machine now lives in the applied vacuum technology laboratory at Hochschule Coburg, where it is described as fully functional and is used for undergraduate measurements and two to three school workshops a year — an amateur-origin machine that became a teaching instrument. Its builders published a short Springer book on the design in 2020, which documents the machine as operated rather than as designed: sweeping the magnet slowly while the Faraday cup sits at a fixed radius records an I(B) spectrum whose first peak, at 187 mT for 2.82 MHz, gives a specific charge within 1% of the proton value, with a second peak identifying H₂⁺. The signal's strength is deliberately not evaluated — the experiment asks which particles are circulating, not how much beam there is, so the machine has no measured beam energy or current. A 2022 conference paper reports the machine as it now stands: a 200 mm × 75 mm chamber, an improved matchbox offering two selectable frequencies, and a base pressure an order of magnitude below the 2013 design figure, alongside the workshop and internship programme built around it.",
   "links": [
    {
     "label": "COLUMBUS design paper (Cyclotrons2013, WE1PB03)",
     "url": "https://proceedings.jacow.org/Cyclotrons2013/papers/we1pb03.pdf"
    },
    {
     "label": "COLUMBUS ten years on (Cyclotrons2022, THPO001)",
     "url": "https://proceedings.jacow.org/cyclotrons2022/papers/thpo001.pdf"
    },
    {
     "label": "Simulation and detection of the helical ion paths (Cyclotrons2016, MOB02)",
     "url": "https://proceedings.jacow.org/cyclotrons2016/papers/mob02.pdf"
    },
    {
     "label": "3D printing for high vacuum applications (Cyclotrons2019, THC04)",
     "url": "https://proceedings.jacow.org/cyclotrons2019/papers/thc04.pdf"
    },
    {
     "label": "Hochschule Coburg: the cyclotron in use (2023)",
     "url": "https://www.hs-coburg.de/news/internationales-interesse-an-coburger-teilchenbeschleuniger/"
    },
    {
     "label": "Forschungszentrum Jülich on the school project (2014)",
     "url": "https://innovations-report.de/fachgebiete/physik-astronomie/ein-zyklotron-macht-schule"
    },
    {
     "label": "Prechtl & Wolf, Das Lehr-Zyklotron COLUMBUS (Springer, 2020)",
     "url": "https://link.springer.com/book/10.1007/978-3-658-29710-7"
    }
   ],
   "compare": {
    "builder_type": "high-school",
    "magnet": {
     "kind": "donated",
     "desc": "Bruker BE-15 water-cooled laboratory magnet, donated by Forschungszentrum Jülich",
     "src": "WE1PB03 p.296, Magnet and Vacuum-Chamber",
     "quote": "Prof. Dr. Maier and his team donated a Bruker BE-15. This is a laboratory magnet with two water-cooled coils."
    },
    "size": {
     "mm": 150,
     "measure": "pole",
     "src": "WE1PB03 p.296, Magnet and Vacuum-Chamber",
     "quote": "The pole-diameter is 150 mm (~ 6 in). The pole pitch is adjustable from 50 - 120 mm"
    },
    "field_t": {
     "v": 0.187,
     "tier": "measured",
     "note": "proton peak in the recorded I(B) spectrum, Hall sensor, at 2.82 MHz; the 2013 design point was 0.38 T",
     "src": "Prechtl & Wolf, Das Lehr-Zyklotron COLUMBUS (Springer essentials, 2020), DOI 10.1007/978-3-658-29710-7 §9.3",
     "quote": "The first peak appears at a flux density of about 187 mT"
    },
    "rf_mhz": {
     "v": 2.82,
     "note": "the documented experiment; 1000 V dee amplitude. The 2013 paper's design frequency was 5.63 MHz, and since 2022 the improved matchbox offers 2.82 and 5.64 MHz as selectable options",
     "src": "Prechtl & Wolf, Das Lehr-Zyklotron COLUMBUS (Springer essentials, 2020), DOI 10.1007/978-3-658-29710-7 §9.3",
     "quote": "For the frequency of the accelerating voltage one chooses 2.82 MHz with 1000 V amplitude.",
     "tier": "operating"
    },
    "vacuum": {
     "text": "1e-6 mbar (≈7.5e-7 torr) base and 1e-5 mbar (≈7.5e-6 torr) with H2 flowing in the 2022 technical data; the 2013 design paper's table gave 1e-5 and 1e-4 mbar. Turbopump + dry backing pump",
     "short": "≈7.5×10⁻⁷ torr",
     "src": "Wolf & Prechtl, COLUMBUS - A Small Cyclotron for School and Teaching Purposes, Proc. Cyclotrons2022 (Beijing) THPO001, pp. 288-290, doi:10.18429/JACoW-CYCLOTRONS2022-THPO001, Table 1",
     "quote": "Vaccum in the chamber 10-6 mbar; dto with H2 10-5 mbar"
    },
    "particle": {
     "text": "protons and H₂⁺, both identified in the beam by their specific charge (proton peak within 1% of the literature value)",
     "short": "p, H₂⁺",
     "src": "Prechtl & Wolf, Das Lehr-Zyklotron COLUMBUS (Springer essentials, 2020), DOI 10.1007/978-3-658-29710-7 §9.3",
     "quote": "The literature value for the specific charge of protons is 9.58·10⁷ As/kg; the deviation is thus only about 1 %."
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": 2014,
    "extraction": {
     "text": "none, by design — the 2013 paper states the beam is deliberately not extracted so that no radiation can leave the experiment. Since August 2021 the team have been building an extraction system, with IBA's help, to deflect the beam through a Wien filter; no extracted beam is reported",
     "src": "https://proceedings.jacow.org/Cyclotrons2013/papers/we1pb03.pdf p.296; Wolf & Prechtl, COLUMBUS - A Small Cyclotron for School and Teaching Purposes, Proc. Cyclotrons2022 (Beijing) THPO001, pp. 288-290, doi:10.18429/JACoW-CYCLOTRONS2022-THPO001, Future Projects",
     "quote": "In August last year, with the support of the IBA, Belgium, the constructing of an extraction system for the ions was started."
    },
    "design_energy_note": "Three published energy figures, and they are three different quantities: 24–48 keV design after 6–8 revolutions at 2.0–3.0 kV dee voltage (2013 paper), 8–16 keV protons as built (builders' 2020 book), and ~4.1 keV protons / 7.5 keV H₂⁺ in the 2022 technical-data table. No beam energy is ever measured — the published experiment identifies particles by specific charge, and the book states the Faraday-cup signal strength is not evaluated.",
    "dee_voltage_kv": {
     "v": 1,
     "src": "Prechtl & Wolf, Das Lehr-Zyklotron COLUMBUS (Springer essentials, 2020), DOI 10.1007/978-3-658-29710-7 §9.3",
     "quote": "2.82 MHz with 1000 V amplitude"
    },
    "rf_power_w": {
     "v": 120,
     "src": "WE1PB03 p.297, The RF-System",
     "quote": "The RF-power-source is a short-wave transceiver for marine radio. ... The available power is 120 W."
    },
    "ion_source": {
     "text": "thermionic filament in a Macor chimney with two puller electrodes on the dee; 7 A heating, 120 V anode, 2 mA emission, 0.10–0.15 ml/min hydrogen",
     "src": "Prechtl & Wolf, Das Lehr-Zyklotron COLUMBUS (Springer essentials, 2020), DOI 10.1007/978-3-658-29710-7 §8.3–8.5, §9.3",
     "quote": "At a heating current of 7 A and an anode voltage of 120 V, an emission current of 2 mA flows."
    },
    "cost_note": "low-cost by design using standard components; magnet donated by Jülich, chamber built free of charge by VACOM (WE1PB03 p.296)"
   },
   "directory_id": "columbus-coburg",
   "url": "https://cyclotroninfo.com/builds/#columbus-coburg-2013"
  },
  {
   "id": "kwolik-2015",
   "name": "Kwolik St. Cloud Cyclotron",
   "builders": "James Kwolik, St. Cloud, Minnesota",
   "country": "USA",
   "years": {
    "start": 2015,
    "first_beam": null,
    "label": "by 2015 (construction years undocumented)"
   },
   "status": "stalled",
   "energy_badge": null,
   "specs": {},
   "summary": "An unfinished build documented by the builder's own 2015 photo tour, preserved in this site's library: a 9.25-inch-OD machine with a 1,080 lb magnet carrying commercially machined low-carbon-steel pole tips chamfered for horizontal focusing at 1.2 T, an oil-cooled high-power RF matching network targeting 10–18 kV peak-to-peak on the dees, and a rotary-vane-plus-diffusion-pump stack with an LN₂ cryotrap the account claims reached 10⁻⁹ torr. The machine still needed its 3 kW RF supply and was in storage — which is where the documented record ends. Indexed 2011 construction posts exist on social platforms but could not be retrieved for verification, so the construction years stay undocumented. The serious-hardware, no-RF ending is one of the census's recurring shapes: the magnet is the romance, the RF chain is the wall.",
   "links": [
    {
     "label": "Building A 9.25″ OD Cyclotron — the builder's 2015 account (library web capture)",
     "url": "/library/#lib-051"
    }
   ],
   "compare": {
    "builder_type": "individual",
    "magnet": {
     "kind": "built",
     "desc": "1,080 lb magnet with commercially machined low-carbon-steel pole tips, chamfered for horizontal focusing; 1.2 T claimed",
     "src": "/library/#lib-051 (2015 web capture)",
     "quote": "1080 lb magnet with commercially machined low-carbon-steel pole tips (chamfered for horizontal focusing, 1.2 T)"
    },
    "size": null,
    "field_t": {
     "v": 1.2,
     "note": "builder's stated figure in the 2015 account; no map or measurement method given",
     "src": "/library/#lib-051 (2015 web capture)",
     "quote": "chamfered for horizontal focusing, 1.2 T",
     "tier": "reported"
    },
    "rf_mhz": null,
    "vacuum": {
     "text": "claimed 10⁻⁹ torr from a rotary-vane + hot-oil diffusion pump stack with LN₂ cryotrap — a bold figure for an elastomer-era amateur system, reported as claimed",
     "src": "/library/#lib-051 (2015 web capture)",
     "quote": "claimed to reach 1e-9 torr",
     "short": "10⁻⁹ torr (claimed)"
    },
    "particle": null,
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none — machine never completed",
     "src": "/library/#lib-051"
    },
    "design_energy_note": null,
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": null
   },
   "directory_id": "kwolik-st-cloud-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#kwolik-2015"
  },
  {
   "id": "umd-19-2016",
   "name": "University of Maryland 19-Inch Cyclotron",
   "builders": "Undergraduate design classes led by Timothy Koeth, University of Maryland",
   "country": "USA",
   "years": {
    "start": null,
    "first_beam": null,
    "label": "c. 2016–present"
   },
   "status": "in-progress",
   "energy_badge": null,
   "specs": {
    "Pole diameter": "483 mm (19 in), restored historic magnet",
    "Particle": "protons (planned)",
    "Energy": "5 MeV design target per the builder's 2026 project history; no beam yet"
   },
   "summary": "A successor machine under construction by successive undergraduate cohorts at the University of Maryland, built around a restored 19-inch magnet alongside the relocated Rutgers 12-inch cyclotron. Unlike the 12-inch machine, whose beam stays inside the chamber, the 19-inch design is intended to extract beam for experiments; Terp Magazine reports that on completion it would be the largest cyclotron built by undergraduates.",
   "links": [
    {
     "label": "Terp Magazine: Beam Team",
     "url": "https://terp.umd.edu/beam-team"
    },
    {
     "label": "Photo log: 19-inch magnet restoration",
     "url": "http://koethcyclotron.org/?page_id=759"
    },
    {
     "label": "Tim's Cyclotron — the builder's thirty-year project history (timkoeth.com, 2026)",
     "url": "http://timkoeth.com/uncategorized/tims-cyclotron/"
    }
   ],
   "compare": {
    "builder_type": "undergraduate",
    "magnet": {
     "kind": "historic",
     "desc": "12,000 lb GE magnet delivered Oct 1947, split and recoiled; 1,000 lb coils; 3-inch air gap",
     "src": "http://koethcyclotron.org/?page_id=759 — Fig. 3, 14, 25, 27 captions",
     "quote": "We started with this old 12,000 pound magnet from 1947. ... Our 19-inch cyclotron magnet was delivered by GE in Oct 1947"
    },
    "size": {
     "mm": 483,
     "measure": "pole",
     "src": "https://terp.umd.edu/beam-team and https://koethgroup.umd.edu/cyclotron/ (19-inch); the koethcyclotron.org restoration page calls it 19.5 in (495 mm)",
     "quote": "19-inch cyclotron"
    },
    "field_t": null,
    "rf_mhz": null,
    "vacuum": null,
    "particle": null,
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "extracted beam planned (design intent; no beam yet)",
     "src": "https://terp.umd.edu/beam-team",
     "quote": "The ability to extract the beam from the chamber for use in experiments will be one of the major differences between the 12-inch cyclotron and the one being developed"
    },
    "design_energy_note": "The builder's 2026 project history (timkoeth.com) states the capstone goal as 'a larger 5-MeV, 19-inch cyclotron' — a design target, not a measured beam. Earlier coverage gave no number: Terp Magazine (Spring 2017) said the new machine 'will crank up the beam strength fivefold compared to his existing machine' and will be 'the largest-ever cyclotron built by undergraduates'; first beam expected 'after a few years and several generations of students'.",
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": null
   },
   "directory_id": "umd-19-inch",
   "url": "https://cyclotroninfo.com/builds/#umd-19-2016"
  },
  {
   "id": "mullins-2017",
   "name": "Mullins Cyclotron",
   "builders": "Simon and Chris Mullins (father and son, home-built)",
   "country": "USA",
   "years": {
    "start": 2017,
    "first_beam": 2018,
    "label": "2017–present"
   },
   "status": "operated",
   "energy_badge": "≈164 keV",
   "specs": {
    "Field": "580–590 mT typical (582 mT at the ≈164 keV run)",
    "RF frequency": "8.9–9 MHz (8.87 MHz at the ≈164 keV run)",
    "Particle": "protons",
    "Energy": "≈150 keV typical operation; ≈164 keV best demonstrated",
    "Beam current": "3.2 nA best (at the ≈164 keV run); 1–2 nA typical",
    "Vacuum": "≈6 × 10⁻⁶ torr while operating",
    "Ion source": "hydrogen filament source; H₂ feed through a used 1 sccm mass-flow controller (the one significant upgrade to date)"
   },
   "summary": "A father-and-son basement build documented on a dedicated project site, carried from magnet design through working machine between 2017 and 2019. Operating at 582 mT with an 8.87 MHz RF system, it demonstrated acceleration of protons to approximately 164 keV. The build log covers the magnet, vacuum system, RF chain, and beam measurements. Status as of August 2026, per the build log: still operational, with over 170 logged runs and the most recent in 2025; typical operation is 1–2 nA of beam at 580–590 mT and 8.9–9 MHz, about 150 keV protons, at roughly 6 × 10⁻⁶ torr — the one significant upgrade to date is a hydrogen delivery system built around a used 1 sccm mass-flow controller.",
   "links": [
    {
     "label": "Project build log",
     "url": "https://mullinscyclotron.weebly.com/"
    },
    {
     "label": "Technical notes and simulation models (hosted on this site)",
     "url": "/library/amateur/#mullins"
    }
   ],
   "compare": {
    "builder_type": "individual",
    "magnet": {
     "kind": "built",
     "desc": "Home-built H-frame electromagnet, 1018 cold-rolled steel (757 lb), 8 in poles, two water-coolable coils wound from 1/4 in ACR copper tubing (538 turns), Sorensen DCS 55-55 supply",
     "src": "https://mullinscyclotron.weebly.com/electromagnet — Design specs / Description",
     "quote": "The electromagnet is an H-frame design. The poles are 8” diameter, 6” long 1018 steel, with 1” steel pole extensions."
    },
    "size": {
     "mm": 203,
     "measure": "pole",
     "src": "https://mullinscyclotron.weebly.com/electromagnet — Design specs",
     "quote": "Pole face diameter: 8 inches; Pole gap: 1.42 inches"
    },
    "field_t": {
     "v": 0.582,
     "note": "operating, at the best (164 keV) run; typical 0.58–0.59 T per Aug 2026 status; max measured 0.850 T at 55 A",
     "src": "https://mullinscyclotron.weebly.com/ — home page 'Best so far'",
     "quote": "Proton energy: 164 keV; Proton Beam current: 3.2 nA; achieved at 582 mT, 8.87 MHz",
     "tier": "operating"
    },
    "rf_mhz": {
     "v": 8.87,
     "note": "operating, at the best run; typical 8.9–9 MHz per Aug 2026 status; early resonance scans at 3.258 MHz",
     "src": "https://mullinscyclotron.weebly.com/ — home page 'Best so far'",
     "quote": "achieved at 582 mT, 8.87 MHz",
     "tier": "operating"
    },
    "vacuum": {
     "text": "≈6e-6 torr while operating (base 8.2e-7 torr best after bakeout; ~5e-4 torr with H2 admitted in early tests)",
     "src": "https://mullinscyclotron.weebly.com/about — Project status as of August 22, 2026",
     "quote": "150 keV proton energy, 6E-6 torr vacuum (while operating)",
     "short": "≈6×10⁻⁶ torr"
    },
    "particle": {
     "text": "protons (H+; H2+ and N+ resonances also observed in field sweeps)",
     "src": "https://mullinscyclotron.weebly.com/it-works — Results",
     "quote": "The main ones show below are 214 mT for H+ (ionized hydrogen atoms) and 427 mT for H2+",
     "short": "p"
    },
    "energy_kev": {
     "v": 164,
     "note": "best run on record, at 582 mT / 8.87 MHz, Faraday cup on linear translator; typical operation ≈150 keV",
     "src": "https://mullinscyclotron.weebly.com/ — home page 'Latest news'",
     "quote": "Best so far: Proton energy: 164 keV ... achieved at 582 mT, 8.87 MHz",
     "tier": "computed"
    },
    "current": {
     "text": "3.2 nA best; 1–2 nA typical",
     "note": "internal, pseudo-Faraday cup (6 AWG crimp lug) on a 4 in linear translator, read on a Keithley 617 electrometer",
     "src": "https://mullinscyclotron.weebly.com/ — home page; /about — status Aug 22, 2026",
     "quote": "Proton Beam current: 3.2 nA ... Typical operation is at 1-2 nA beam current",
     "short": "3.2 nA best; 1–2 typical"
    },
    "first_beam_year": 2018,
    "extraction": {
     "text": "none, by design (internal Faraday cup on a linear translator)",
     "src": "https://mullinscyclotron.weebly.com/chamber — port list",
     "quote": "9 - Faraday cup – 4 pin vacuum feed thru to triax cable ... 10 - linear translator – 4 inch travel linear translator to adjust Faraday cup position"
    },
    "design_energy_note": null,
    "dee_voltage_kv": {
     "v": 1.3,
     "src": "https://mullinscyclotron.weebly.com/it-works — differences from final design, item 2",
     "quote": "We're getting 1300 Volts of RF on the Dee, which is enough to run the cyclotron."
    },
    "rf_power_w": {
     "v": 5,
     "src": "https://mullinscyclotron.weebly.com/it-works — item 2 (50 W amp fails on unmatched loads)",
     "quote": "For now, the 5W pre-amp is sufficient for operation."
    },
    "ion_source": {
     "text": "hot tungsten filament (ES-020, ~2.25 A, biased −300 V DC) ionizing hydrogen in the chamber; H2 from a lecture bottle via needle valve, later a used 1 sccm mass-flow controller",
     "src": "https://mullinscyclotron.weebly.com/filament-and-meter-tests; /about status Aug 2026",
     "quote": "Electronics are emitted via thermionic emission from an ES-020 tungsten filament ... A separate DC supply biases the filament to -300VDC"
    },
    "cost_note": null
   },
   "directory_id": "mullins-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#mullins-2017"
  },
  {
   "id": "cyclotron-project-2018",
   "name": "The Cyclotron Project",
   "builders": "Reed Michael Upson and Ray Anchordoquy (backyard workshop build)",
   "country": "USA",
   "years": {
    "start": 2018,
    "first_beam": null,
    "label": "2018–present"
   },
   "status": "in-progress",
   "energy_badge": null,
   "specs": {
    "Dee diameter": "356 mm (14 in)",
    "Field": "≈0.3 T (3 kG) median-plane",
    "Particle": "protons",
    "Energy": "60 keV target (revised down from 1.1 MeV, the builders citing incidental radiation)",
    "Vacuum": "10⁻⁵ torr target"
   },
   "summary": "A two-person build housed in a purpose-built, Faraday-caged garden shed, under way since 2018 and documented on a project site. The original 1.1 MeV goal was deliberately reduced to about 60 keV to avoid incidental radiation hazards. As of the site's last update in late 2024, subsystems including vacuum and the ion source were being validated individually and no beam had yet been produced.",
   "links": [
    {
     "label": "Project site",
     "url": "https://thecyclotronproject.github.io/"
    },
    {
     "label": "Project photo gallery",
     "url": "https://thecyclotronproject.github.io/Gallery-link/"
    }
   ],
   "compare": {
    "builder_type": "individual",
    "magnet": {
     "kind": "built",
     "desc": "Two self-wound coils on steel frames with a welded solid-steel yoke made from discarded elevator weights; yoke + magnets ≈400 lb; Variac-driven, passively cooled",
     "src": "https://thecyclotronproject.github.io/magnets-link/ — The yoke",
     "quote": "we constructed the main structure of the yoke from discarded elevator weights. These were cut to size and then welded together."
    },
    "size": {
     "mm": 356,
     "measure": "dee",
     "src": "https://thecyclotronproject.github.io/dees-link/ — What are dees?",
     "quote": "the dees are 14” in diameter and 1” thick with a 0.1” wall thickness and a gap of 1”"
    },
    "field_t": {
     "v": 0.3,
     "note": "design; magnets so far 'functional to ~.1T'",
     "src": "https://thecyclotronproject.github.io/ — What are the specs?",
     "quote": "Our magnets produce a field of about 0.3T in the median plane.",
     "tier": "design"
    },
    "rf_mhz": {
     "v": 1.5,
     "note": "bench work on the RF system at the frequency the builders quote for present work; consistent with the ~0.1 T the magnets have reached so far rather than with the 0.3 T design field in the field column; no beam yet",
     "src": "https://thecyclotronproject.github.io/dees-link/",
     "quote": "Because we’re working with relatively low frequencies (~1.5MHz)",
     "tier": "bench"
    },
    "vacuum": {
     "text": "1e-5 torr target (not yet met); 10⁻³ torr range reached; 4.42e-2 torr after freeze contamination",
     "src": "https://thecyclotronproject.github.io/ — What are the specs?",
     "quote": "Our vacuum target (not yet met) is 10-5 torr.",
     "short": "10⁻⁵ torr target"
    },
    "particle": {
     "text": "protons",
     "src": "https://thecyclotronproject.github.io/ — What is the goal?",
     "quote": "our threshold goal is to accelerate protons to energies of 60KeV",
     "short": "p"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented (one dee has an extraction slit, unused in the current dummy-dee configuration)",
     "src": "https://thecyclotronproject.github.io/dees-link/",
     "quote": "one of the dees has a small extraction slit in the side. This is not actually useful in the current design"
    },
    "design_energy_note": "60 keV threshold target (revised down in Nov 2024 from the original 1.1 MeV design over incidental-radiation concerns); no beam yet",
    "dee_voltage_kv": {
     "v": 1.2,
     "src": "https://thecyclotronproject.github.io/ — What is left to do?",
     "quote": "Our target peak to peak amplitude is 1.2kV."
    },
    "rf_power_w": null,
    "ion_source": {
     "text": "PIG (electron-bombardment) hydrogen source with hot tungsten filament, built from copper plumbing parts",
     "src": "https://thecyclotronproject.github.io/ion-link/ — Design",
     "quote": "Our ion source is an electron bombardment source, in particular, a PIG source."
    },
    "cost_note": "Funded entirely by donations of materials and time (steel, aluminum, Variacs, machining) per the Supporters page"
   },
   "directory_id": "the-cyclotron-project-shed",
   "url": "https://cyclotroninfo.com/builds/#cyclotron-project-2018"
  },
  {
   "id": "takanashi-2019",
   "name": "Takanashi Home Cyclotron",
   "builders": "Takaoki Takanashi (高梨宇宙), Japan",
   "country": "Japan",
   "years": {
    "start": 2019,
    "first_beam": null,
    "label": "c. 2019"
   },
   "status": "unknown",
   "energy_badge": null,
   "specs": {
    "Magnet": "permanent magnet beneath the chamber, ≈¥150,000 — half the budget",
    "Chamber": "self-designed, fabricated to order (≈¥100,000); the first design used a non-standard vacuum flange spec, found only after fabrication",
    "Ion source": "hot tungsten filament ionising hydrogen admitted to the evacuated chamber; the filament is threaded through a 0.45 mm hole hand-drilled in 0.8 mm copper wire under a watchmaker’s loupe",
    "Dee": "single hollow semicircular brass dee",
    "RF system": "secondhand, sourced from online auctions and eBay; final hardware suggested by an amateur-radio friend",
    "Detection": "metal rod intended to collect accelerated protons and read them as a current; no reading has been published",
    "Particle": "protons",
    "Cost": "≈¥300,000 total (roughly US$2,000–2,800 at 2019 rates)"
   },
   "summary": "A tabletop classical cyclotron built in an apartment living room by a theoretical particle physicist with no experimental or engineering training, who bought a lathe and a milling machine and worked by trial and error — reading papers and manufacturer catalogues to choose hardware, and buying most of it secondhand. Machine shops initially refused the vacuum chamber job, suspicious that no individual would build such a thing, before one agreed; the finished chamber then turned out to use a non-standard flange spec. The builder is explicit that the machine is not for experiments: building it was the point, and he chose a cyclotron over a fusor because fusor instructions are already all over the internet, leaving no trial and error. He exhibited it at Maker Faire Tokyo in 2019, where a RIKEN colleague explained the physics to the press, and states that he designed, built and got the machine running. No beam energy, current, field or frequency has been published, so what it achieved is undocumented. He went on to build a Wideröe-type linear accelerator in the same room — the machine he exhibited at Maker Faire Tokyo in 2022 — and his machine became the seed for a national student cyclotron programme (see AxeLatoon, below). He is a researcher at RIKEN, and the programme's own record has him introducing the home cyclotron to first-year students at Oyama KOSEN in November 2021 and the home linac at Nagano KOSEN a month later. Both posts describe him presenting the machines and taking questions, not running them; no measurement from either occasion is published.",
   "links": [
    {
     "label": "ITmedia NEWS: the self-built particle accelerator (2019, Japanese)",
     "url": "https://www.itmedia.co.jp/news/articles/1908/09/news063.html"
    },
    {
     "label": "Maker Faire Tokyo 2019 exhibitor page",
     "url": "https://makezine.jp/event/makers-mft2019/m0066/"
    },
    {
     "label": "Maker Faire Shenzhen: Meet the maker (2021, English)",
     "url": "https://www.shenzhenmakerfaire.com/2021/10/13/meet-the-maker-diy-particle-accelerator/"
    },
    {
     "label": "Zaikei Shimbun: built at home for about ¥300,000 (2019, Japanese)",
     "url": "https://zaikei.co.jp/article/20190813/525784.html"
    },
    {
     "label": "AxeLatoon: Maker Faire Tokyo 2020, with the Wabi-Sabi Phys. Lab. interview (KEK, Japanese)",
     "url": "https://www2.kek.jp/axltn/posts/2020/279/"
    },
    {
     "label": "AxeLatoon: introducing the home cyclotron at Oyama KOSEN, 10 Nov 2021 (Japanese)",
     "url": "https://www2.kek.jp/axltn/posts/2021/314/"
    },
    {
     "label": "AxeLatoon: introducing the home linac at Nagano KOSEN, 20 Dec 2021 (Japanese)",
     "url": "https://www2.kek.jp/axltn/posts/2021/354/"
    },
    {
     "label": "Maker Faire Tokyo 2022 exhibitor page — the Wideröe linac (Japanese)",
     "url": "https://makezine.jp/event/makers-mft2022/m0075/"
    }
   ],
   "compare": {
    "builder_type": "individual",
    "magnet": {
     "kind": "permanent",
     "desc": "permanent magnet under the chamber, ≈¥150,000",
     "src": "https://www.itmedia.co.jp/news/articles/1908/09/news063.html (and https://zaikei.co.jp/article/20190813/525784.html)",
     "quote": "空間の下には磁石があるので、ここには磁場があります [tr.: there is a magnet beneath the space, so there is a field here]"
    },
    "size": null,
    "field_t": null,
    "rf_mhz": null,
    "vacuum": null,
    "particle": {
     "text": "protons, from hydrogen gas ionised in the chamber",
     "short": "p",
     "src": "https://www.itmedia.co.jp/news/articles/1908/09/news063.html",
     "quote": "水素ガスが電離して、電子と陽子に分かれます [tr.: the hydrogen gas is ionised and separates into electrons and protons]"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented"
    },
    "design_energy_note": "No field, frequency, dee voltage, pressure, beam energy or current has been published for this machine in any accessible source.",
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": {
     "text": "hot tungsten filament ionising hydrogen in the chamber",
     "src": "https://www.itmedia.co.jp/news/articles/1908/09/news063.html",
     "quote": "フィラメントに電流を流して暖めると、近くの水素ガスが電離して [tr.: heating the filament with current ionises the nearby hydrogen gas]"
    },
    "cost_note": "≈¥300,000 total; the permanent magnet ≈¥150,000 and the chamber ≈¥100,000"
   },
   "directory_id": "takanashi-home-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#takanashi-2019"
  },
  {
   "id": "dawson-emc2",
   "name": "Dawson College Mini Cyclotron (EMC²)",
   "builders": "Student-led team of roughly ten CEGEP and undergraduate students (“Engineering a Mini Cyclotron Crew” / BICEPs), Dawson College, Montreal",
   "country": "Canada",
   "years": {
    "start": 2023,
    "first_beam": null,
    "label": "2023–2025"
   },
   "status": "stalled",
   "energy_badge": null,
   "specs": {
    "Project": "BICEPs — “Bi-Institutional Cyclotron for Experimental Physics”; the college foundation listed it as the “Engineering a Mini Cyclotron Crew” (EMC²). The idea originated as a CERN Beamline for Schools proposal under DawsonHEP and was revived in fall 2023",
    "Magnet": "recovered laboratory electromagnet; now sitting unused in a McGill University physics lab",
    "Design dee diameter": "300 mm",
    "Design field": "1 T",
    "Particles (design)": "protons and H₂⁺, from ionised hydrogen",
    "Research output": "a betatron-motion and radiation-shielding study, presented at the Canadian Undergraduate Physics Conference 2024 and published in DrJES vol. 15 (Winter 2025)",
    "Outcome": "wound down in 2025 as members moved on to university; no construction milestones were published"
   },
   "summary": "A student initiative at a Montreal CEGEP — BICEPs, the “Bi-Institutional Cyclotron for Experimental Physics”, known to the college foundation as the “Engineering a Mini Cyclotron Crew” (EMC²) — that set out in fall 2023 to build a compact cyclotron and wound down in 2025 as its members moved on to university. The design called for 300 mm dees in a 1 T field, accelerating protons and H₂⁺. The team presented a study of betatron motion and radiation shielding at the Canadian Undergraduate Physics Conference in 2024 and published it in the college research journal in 2025; the recovered laboratory electromagnet now sits unused in a McGill University physics lab. Project history and status per correspondence with a project co-author, August 2026.",
   "links": [
    {
     "label": "Dawson College Foundation project page",
     "url": "https://www.dawsoncollege.qc.ca/dawson-foundation/projects/engineering-a-mini-cyclotron-crew/"
    },
    {
     "label": "Shnoot, Torres & Boukhira, “Optimizing Cyclotron Chamber Geometry”, DrJES vol. 15 (Winter 2025), pp. 4–10",
     "url": "https://www.dawsoncollege.qc.ca/drjes/wp-content/uploads/sites/205/DrJes-Winter-2025-Volume-15.pdf"
    }
   ],
   "compare": {
    "builder_type": "undergraduate",
    "magnet": {
     "kind": "lab-magnet",
     "desc": "described by the team as a recovered laboratory magnet; now sitting unused in a McGill University physics lab",
     "src": "Ana Torres (project co-author), correspondence with cyclotroninfo.com, 2026-08-23",
     "quote": "The electromagnet itself is currently at McGill. It had previously been used for experiments and is simply there sitting under a table in a physics lab."
    },
    "size": {
     "mm": 300,
     "measure": "dee",
     "src": "Ana Torres (project co-author), correspondence with cyclotroninfo.com, 2026-08-23",
     "quote": "(Design) Dee diameter: 300mm, Field: 1T, Particle: p,  H₂⁺"
    },
    "field_t": {
     "v": 1,
     "tier": "design",
     "note": "design point stated by the team; no construction milestones or operating figures were published",
     "src": "Ana Torres (project co-author), correspondence with cyclotroninfo.com, 2026-08-23",
     "quote": "(Design) Dee diameter: 300mm, Field: 1T, Particle: p,  H₂⁺"
    },
    "rf_mhz": null,
    "vacuum": null,
    "particle": {
     "text": "protons and H₂⁺ (design); the published study chose a proton beam from ionised hydrogen",
     "short": "p, H₂⁺",
     "src": "Shnoot, Torres & Boukhira, “Optimizing Cyclotron Chamber Geometry”, Dawson Research Journal of Experimental Science (DrJES) vol. 15, Winter 2025, pp. 4–10 (p. 9); species per Ana Torres (project co-author), correspondence with cyclotroninfo.com, 2026-08-23",
     "quote": "This explains our choice of using a proton beam created by ionizing hydrogen gas as our ion source."
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented"
    },
    "design_energy_note": "The team's published design study derives chamber radius from a chosen exit energy and treats radiation shielding, but states no design energy figure; the stated design parameters are a 300 mm dee diameter and a 1 T field.",
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": null
   },
   "directory_id": "dawson-college-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#dawson-emc2"
  },
  {
   "id": "oyama-kosen-2021",
   "name": "Oyama KOSEN Cyclotron",
   "builders": "Oyama KOSEN students (Athena club) with the AxeLatoon collaboration — KEK, RIKEN and university staff",
   "country": "Japan",
   "years": {
    "start": 2021,
    "first_beam": null,
    "label": "2021–present"
   },
   "status": "in-progress",
   "energy_badge": null,
   "specs": {
    "Design": "CST Studio 3D electromagnetic field simulation and particle orbit calculation, done by the students before the chamber was designed",
    "Size": "palm-sized (手のひらサイズ)",
    "Particle": "protons (intended)",
    "Dee": "dee electrode and filament originally fixed by 3D-printed mesh plates, later redesigned once the accelerating field distribution was accounted for",
    "Status": "operating since January 2023; the internal detector registers a current the team attributes to particles, with first unambiguous ion-beam observation still pending"
   },
   "summary": "The first of the AxeLatoon student cyclotrons to reach operation. Twelve first-year students across mechanical, electrical and materials departments began design work in July 2021 with staff from the collaboration, simulating the field distribution and particle orbits in CST Studio before designing the chamber. Chamber fabrication began in spring 2022, with the filament and its drive circuit, the hydrogen system and the other peripherals prepared in parallel; pumps and the RF oscillator were connected around July 2022, and the machine began operating in January 2023. Repeated running has the internal detector registering a current the team attributes to particles, but the team is explicit that the first unambiguous ion-beam observation still needs fine tuning and time. The group also wrote the detailed RF tuning procedure — nulling reflected power — that the other AxeLatoon sites now follow. A deliberately-kept teaching moment: energising the filament before the chamber was evacuated burned it out in about a second and a half, in a very bright flash.",
   "links": [
    {
     "label": "Otani et al., Making Accelerators at KOSEN, J. Plasma Fusion Res. 101(5) 226–231 (2025, Japanese)",
     "url": "https://www.jspf.or.jp/Journal/PDF_JSPF/jspf2025_05/jspf2025_05-226.pdf"
    },
    {
     "label": "AxeLatoon programme (KEK)",
     "url": "https://www2.kek.jp/axltn/about/"
    },
    {
     "label": "AxeLatoon booklet (Aug 2025, Japanese)",
     "url": "https://www2.kek.jp/axltn/booklet.pdf"
    },
    {
     "label": "Otani, Accelerator construction at KOSEN — AxeLatoon, Hoshasen (放射線) 49(4) 98–101 (2025, Japanese)",
     "url": "https://doi.org/10.11470/houshasen.49.4_98"
    },
    {
     "label": "Kumagai et al., AxeLatoon: the KOSEN exchange meeting, J. Particle Accel. Soc. Japan 21(2) 139–142 (2024, Japanese)",
     "url": "https://doi.org/10.50868/pasj.21.2_139"
    }
   ],
   "compare": {
    "builder_type": "kosen",
    "magnet": null,
    "size": null,
    "field_t": null,
    "rf_mhz": null,
    "vacuum": null,
    "particle": {
     "text": "protons (intended)",
     "short": "p (intended)",
     "src": "https://www.jspf.or.jp/Journal/PDF_JSPF/jspf2025_05/jspf2025_05-226.pdf §7.3.1",
     "quote": "サイクロトロン加速器製作に向けた設計を開始した [tr.: began design work toward building a cyclotron]"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "none documented"
    },
    "design_energy_note": "No field, frequency or design energy is published for this machine. It has been operating since January 2023 with the internal detector registering particles as a current; first unambiguous ion-beam observation was still pending as of the May 2025 report.",
    "dee_voltage_kv": null,
    "rf_power_w": null,
    "ion_source": null,
    "cost_note": null
   },
   "directory_id": "oyama-kosen-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#oyama-kosen-2021"
  },
  {
   "id": "iuac-2024",
   "name": "IUAC Tabletop Cyclotron",
   "builders": "Inter-University Accelerator Centre staff, New Delhi — from a proposal by P. C. Deshmukh; begun under G. Rodrigues, led by R. Mehta after his retirement; T. Koeth (University of Maryland) advising remotely",
   "country": "India",
   "years": {
    "start": 2024,
    "first_beam": null,
    "label": "2024 – present"
   },
   "status": "in-progress",
   "energy_badge": null,
   "specs": {
    "Pole diameter": "305 mm (design)",
    "Field": "1.2 T median plane (tender specification)",
    "Pole gap": "51 mm nominal (design)",
    "RF frequency": "18.2 MHz; bench-tested to 200 W, 2 kW CW amplifier in development",
    "Particle": "protons (intended)",
    "Energy": "1 MeV (2026 feature) / 1.2 MeV (CAMOST report) — design targets; no beam demonstrated"
   },
   "summary": "The census's first national-laboratory build: a teaching-scale proton cyclotron under development at India's Inter-University Accelerator Centre since 2024, from a proposal by P. C. Deshmukh that grew out of a 2023 conversation with IUAC's director — with Timothy Koeth of the Maryland 19-inch advising remotely, a documented design lineage from the Rutgers/Maryland educational machines. The paper trail is procurement-grade: a magnet tender specifying 1.2 T on 305 mm poles across a 51 mm gap, an annual report recording two fabricated chambers and a full Dee–dummy-dee RF system, and a conference paper reporting the RF bench-tested to 200 W at 18.2 MHz. Two design energies circulate (1 MeV in the Shaastra feature, 1.2 MeV in the CAMOST report) and neither is a measured beam: no accelerated or extracted beam is documented, and the director's own stated milestone is 'We first need to demonstrate beam extraction.' The feature reports medical-isotope and proton-therapy hopes and an exploratory industry partnership as future directions.",
   "links": [
    {
     "label": "“The desktop marvel” — Shaastra (IIT Madras), July 2026",
     "url": "https://shaastramag.iitm.ac.in/special-feature/desktop-marvel"
    },
    {
     "label": "IUAC magnet tender 09/GOR/2024–25 (design specification)",
     "url": "https://www.iuac.res.in/sites/default/files/tender_files/NIT09GOR.pdf"
    },
    {
     "label": "IUAC Annual Report 2024–25, ch. 3 (RF system, fabricated chambers)",
     "url": "https://www.iuac.res.in/sites/default/files/annual_report_files/AnnRep_2024_25_Chapter03.pdf"
    },
    {
     "label": "IPAC2026 MOP6698 (RF controller; 18.2 MHz, 200 W test)",
     "url": "https://www.ipac26.org/prepress/pdf/MOP6698.pdf"
    },
    {
     "label": "CAMOST Annual Report 2022–24 (1.2 MeV proposal)",
     "url": "https://www.iisertirupati.ac.in/camost/files/ar_camost_22-24.pdf"
    }
   ],
   "compare": {
    "builder_type": "laboratory",
    "magnet": {
     "kind": "",
     "desc": "Procured to IUAC's design: H-frame water-cooled DC electromagnet, 1.2 T median plane, 305 mm poles, 51 mm nominal gap, 2 × 162 turns at 200 A (tender 09/GOR/2024–25)",
     "src": "https://www.iuac.res.in/sites/default/files/tender_files/NIT09GOR.pdf — pp. 17-19, 47",
     "quote": "The H-Dipole, DC Electromagnet is required to generate a magnetic field of 1.2 Tesla in the median plane"
    },
    "size": {
     "mm": 305,
     "measure": "pole",
     "src": "https://www.iuac.res.in/sites/default/files/tender_files/NIT09GOR.pdf — specification table, p. 18",
     "quote": "Pole diameter … 305 mm"
    },
    "field_t": {
     "v": 1.2,
     "note": "tender requirement, not a mapped field; self-consistent with the published 18.2 MHz RF for protons (f = qB/2πm gives 18.3 MHz at 1.2 T)",
     "src": "https://www.iuac.res.in/sites/default/files/tender_files/NIT09GOR.pdf — specification table, p. 18",
     "quote": "1.2 Tesla (at the median plane)",
     "tier": "design"
    },
    "rf_mhz": {
     "v": 18.2,
     "note": "the RF system's operational frequency in the published controller test — a bench measurement of the resonator at up to 200 W, not an accelerating run",
     "src": "https://www.ipac26.org/prepress/pdf/MOP6698.pdf — p. 3",
     "quote": "for TT cyclotron, the operational frequency is 18.2 MHz",
     "tier": "bench"
    },
    "vacuum": null,
    "particle": {
     "text": "protons (intended)",
     "src": "https://www.iisertirupati.ac.in/camost/files/ar_camost_22-24.pdf — p. 16",
     "quote": "1.2 MeV proton cyclotron proposed to be built in India by Prof. P. C. Deshmukh is currently under development at the Inter-University Accelerator Center, New Delhi",
     "short": "p (intended)"
    },
    "energy_kev": null,
    "current": null,
    "first_beam_year": null,
    "extraction": {
     "text": "stated as the project's demonstration milestone; not yet attempted with beam",
     "src": "https://shaastramag.iitm.ac.in/special-feature/desktop-marvel — A. C. Pandey, quoted",
     "quote": "We first need to demonstrate beam extraction. Once we achieve the desired result, we will be able to make educated decisions."
    },
    "design_energy_note": "two design targets circulate and no source reconciles them: 1 MeV for the prototype (Shaastra feature, July 2026) and 1.2 MeV (CAMOST Annual Report 2022–24, p. 16). Both are proposals, not beam measurements; at 1.2 T the arithmetic puts ~1 MeV protons at a 120 mm orbit radius inside the 152.5 mm pole radius",
    "dee_voltage_kv": null,
    "rf_power_w": {
     "v": 200,
     "note": "highest published test of the RF system into the resonator; the annual report's development target is a 2 kW CW solid-state amplifier",
     "src": "https://www.ipac26.org/prepress/pdf/MOP6698.pdf — p. 3; https://www.iuac.res.in/sites/default/files/annual_report_files/AnnRep_2024_25_Chapter03.pdf — printed p. 40",
     "quote": "this controller in GDR mode has been operated with a frequency tuner up to 200W RF power"
    },
    "ion_source": {
     "text": "internal source feeding a Dee–dummy-dee accelerating structure; type not published",
     "src": "https://www.iuac.res.in/sites/default/files/annual_report_files/AnnRep_2024_25_Chapter03.pdf — printed p. 40",
     "quote": "The aim of the RF system is to generate and maintain high RF voltage across Dee-Dummy Dee to accelerate the particles from the ion source of Cyclotron"
    },
    "cost_note": "≈₹50 lakh (~$60k) reported as the initial prototype budget (Shaastra); the magnet tender's own estimate is ₹50 lakh for its scope alone — different scopes, and no all-in project total is published"
   },
   "directory_id": "iuac-tabletop-cyclotron",
   "url": "https://cyclotroninfo.com/builds/#iuac-2024"
  }
 ]
}