---
title: "Vacuum & Beam Survival Calculator · Cyclotron Info"
canonical: https://cyclotroninfo.com/calculators/vacuum/
description: "Interactive calculator for beam survival: surviving beam fraction against chamber pressure, either with one loss cross-section over a given path length or integrated turn by turn along the orbit with the measured energy-dependent cross-sections for H⁺ and H₂⁺ in hydrogen."
generated: 2026-11-22
note: "Markdown rendering of the canonical HTML page, generated at build for AI assistants and text tools. Figures and interactive elements are described, not reproduced. On Design Guide rules the source quote, this site's paraphrase and this site's editorial note are labelled separately and must not be conflated."
licence: "Datasets CC BY 4.0, census snapshot CC BY-NC 4.0 (https://cyclotroninfo.com/data/); cite as Cyclotron Info, cyclotroninfo.com"
---
# Vacuum & Beam Survival Calculator

A cyclotron beam dies by collision: every residual gas molecule along the spiral is a chance to charge-exchange or scatter out of the machine. This calculator converts a chamber pressure into a mean free path and an estimated surviving beam fraction over your total path length (from the [path length calculator](https://cyclotroninfo.com/calculators/path-length/)), and tells you what pressure keeps losses under 10%.

*Interactive controls on the page (not operable here), with their defaults:*
- Model Simple mode takes a path length and one σ. Orbit mode computes the spiral from field, energy and dee voltage and uses the measured energy-dependent cross-section for each turn. (choices: Simple — one loss cross-section over the whole path; Along the orbit — σ(E) from ORNL-6086, integrated turn by turn): default Simple — one loss cross-section over the whole path
- True gas pressure at the beam Gas-dependent gauges need correction first: a nitrogen-calibrated ion gauge's relative sensitivity to H₂ is 0.42–0.53 (O'Hanlon Table 5.1), so an uncorrected reading understates hydrogen pressure by about two; the instrument manual has the exact factor. The gas menu below does not correct readings.: default 1e-5
- Pressure unit (choices: torr; mbar; Pa): default torr
- Residual gas Orbit mode locks this to H₂ — the ORNL loss tables are for H₂ targets only. (choices: H₂ (hydrogen ion source); Air (chamber leak / outgassing)): default H₂ (hydrogen ion source)
- Gas temperature (°C): default 20
- Total path length L (m) From the path length calculator: default 7.6
- Loss cross-section σ (cm²) Energy-dependent — see the table below: default 1e-16
- Ion Cross-section tables exist for these two in H₂ gas (choices: H⁺ (proton); H₂⁺ (molecular hydrogen)): default H⁺ (proton)
- Magnetic field B (T): default 0.6
- Final kinetic energy (keV) Sets the final radius with the energy calculator's formula: default 150
- Peak dee voltage Vp (kV) Dee-to-dee peak for two dees; dee-to-ground peak with a dummy dee. The model credits the full peak at every crossing — real crossings are off-peak, so entering a lower effective voltage (more turns, more path) is the conservative choice.: default 1
- Gap crossings per turn: default 2

[Figure, drawn on the page: Surviving beam fraction versus chamber pressure on a logarithmic axis, with the current operating point and the 90 percent survival threshold marked]

*Figure caption:* Surviving beam fraction F = exp(−L/λ) over the total path L, versus chamber pressure (log scale). The filled dot is the current operating point; the dashed line is 90 % survival (10 % loss), with the open marker showing the pressure that meets it. Hover for values; exact numbers are in the results table.

## Results

This calculator requires JavaScript; the formulas it uses are given in full below.

|   |   |
| --- | --- |
| Pressure (all units) | — |
| Gas number density n | — |
| Gas–gas mean free path (kinetic theory) | — |
| Final orbit radius | — |
| Turns to final energy | — |
| Total path length | — |
| Path-weighted mean σ along the orbit | — |
| Beam loss mean free path λ = 1/nσ | — |
| Beam surviving the modeled gas losses over L | — |
| Pressure for <10% loss over L | — |

## The math

From the ideal gas law, the number density of residual gas molecules is

n = p / k<sub>B</sub>T

A fast beam particle traversing (effectively stationary) gas with a loss cross-section σ has a mean free path λ = 1/nσ, and — **in the simple single-collision-loss model used here, where every such collision removes the particle** — the fraction surviving a path L is

F = exp(−nσL) = exp(−L/λ)

Requiring F ≥ 0.9 gives the pressure bound p ≤ −ln(0.9)·k<sub>B</sub>T/(σL). For reference the calculator also shows the ordinary kinetic-theory mean free path of the gas itself, λ<sub>gas</sub> = k<sub>B</sub>T/(√2 πd<sup>2</sup>p), using hard-sphere diameters d = 0.274 nm for H₂ and 0.366 nm for air (O'Hanlon App. B.2) — note the √2 applies only to gas–gas collisions, not to the fast beam.

### Along the orbit

The cross-section is not constant: for protons in hydrogen it peaks near 10⁻¹⁵ cm² at 7 keV and falls nearly three orders of magnitude by 200 keV, so a beam loses most of its particles in its early turns. Orbit mode replaces the single σ with the sum over turns. With ΔT = n<sub>gaps</sub>·q·V<sub>p</sub> per turn (every crossing at the voltage peak, as in the [path-length calculator](https://cyclotroninfo.com/calculators/path-length/)), the beam completes ⌊T<sub>final</sub>/ΔT⌋ whole turns — after k of them it has energy kΔT and the radius of that energy, r(E) = √(2mE)/qB — plus a final partial turn evaluated at its midpoint energy and radius, so the energy used for σ and the energy used for geometry agree at every step. The survival is

F = exp(−n [ Σ<sub>k</sub> σ(kΔT)·2πr(kΔT) + frac·σ(Ē)·2πr(Ē) ])

The second term is the final partial turn: frac is the fractional turn remaining and Ē its midpoint energy. It vanishes when T<sub>final</sub>/ΔT is an integer.

Since every term is proportional to n, the optical depth −ln F is linear in pressure (the lost fraction 1 − F is approximately linear only while it is small) and the curve above keeps its shape; what changes is the effective σ, reported as the path-weighted mean. σ(E) is interpolated log-log in the tables below; outside their range it is held at the end values — an unsourced extrapolation, not data, and the result flags it whenever a lookup leaves the tabulated range. For H₂⁺ the tables are tabulated per nucleon, so a 150 keV H₂⁺ ion is looked up at 75 keV/amu.

### The cross-sections

Recommended values from the Oak Ridge compilation (Barnett et al. 1990, ORNL-6086 Vol. 1; [OSTI full text](https://www.osti.gov/biblio/6570226), retrieved 2026-08-23). Protons lose by electron capture, H⁺ + H₂ → H + H₂⁺ (p. A-28; stated accuracy 10% above 100 eV). H₂⁺ is destroyed by capture and by collisional dissociation together; the total-destruction cross-section (p. G-46; accuracy 20%) is tabulated only to 50 keV/amu. Above that the calculator holds the last value — the measured trend to 50 keV/amu is falling, but whether the held value over- or understates the true loss beyond the table is not established by the source.

| Energy (keV/amu) | σ, H⁺ + H₂ → H + H₂⁺ (cm²) | σ, H₂⁺ + H₂ → total destruction (cm²) |
| --- | --- | --- |
| 1 | 4.26 × 10⁻¹⁶ | — |
| 1.5 | — | 8.12 × 10⁻¹⁶ |
| 2 | 6.88 × 10⁻¹⁶ | 8.18 × 10⁻¹⁶ |
| 4 | 9.33 × 10⁻¹⁶ | 8.30 × 10⁻¹⁶ |
| 7 | 9.57 × 10⁻¹⁶ | 8.15 × 10⁻¹⁶ |
| 10 | 8.66 × 10⁻¹⁶ | 8.18 × 10⁻¹⁶ |
| 15 | — | 8.46 × 10⁻¹⁶ |
| 20 | 5.79 × 10⁻¹⁶ | 7.75 × 10⁻¹⁶ |
| 40 | 2.50 × 10⁻¹⁶ | 4.69 × 10⁻¹⁶ |
| 50 | — | 3.81 × 10⁻¹⁶ |
| 70 | 7.78 × 10⁻¹⁷ | — |
| 100 | 2.91 × 10⁻¹⁷ | — |
| 200 | 1.76 × 10⁻¹⁸ | — |
| 400 | 6.09 × 10⁻²⁰ | — |
| 700 | 3.64 × 10⁻²¹ | — |
| 1000 | 4.14 × 10⁻²² | — |

Simple mode is exact when handed the right path-weighted σ for the trajectory, and conservative only when handed a true upper bound over it — which "the low-energy end" is not automatically, since the proton cross-section rises from 1 to 7 keV/amu. For the reference 2–150 keV proton spiral the two modes agree closely (its path-weighted σ lands near 10⁻¹⁶ cm²), but that agreement is the trajectory's and does not transfer: a 20 keV, 1 kV proton machine's path-weighted σ is 7.5 × 10⁻¹⁶ cm², and the default 10⁻¹⁶ would permit about seven times too much pressure there. For H₂⁺ the default understates the loss several-fold at any tabletop energy — the destruction cross-section stays within a factor of about two of its peak across the table's range.

### Assumptions and limits

- Simple mode: one constant σ over the whole spiral. Orbit mode: σ(E) per turn from the tables, every gap crossing at peak voltage, orbit radius from the non-relativistic energy formula.
- Orbit mode's stopping convention: whole turns at their own energy and radius, then one partial turn evaluated at that segment's midpoint energy and radius — an approximation, not a gap-by-gap orbit integration.
- Every loss collision removes the particle; small-angle scattering that merely dilutes the beam is not counted separately.
- Uniform pressure and gas composition throughout the chamber — in particular, the pressure inside the dee is taken equal to the chamber pressure. That can be optimistic: dee conductance limits and the source's local gas load usually make the beam-path pressure higher than the gauge reads. The [vacuum page](https://cyclotroninfo.com/learn/vacuum/) quantifies the dee-interior excess.
- The cross-sections are for hydrogen gas, and the calculator enforces it: orbit mode locks the gas selector to H₂. Air cross-sections differ and no air loss model is offered.
- The result is survival against the modeled gas-loss processes only — capture for protons, total destruction for H₂⁺. Source efficiency, phase loss, scattering acceptance, centering, and extraction are not modeled.

### Worked checks

Simple mode: at 1 × 10⁻⁵ torr of H₂ at 20 °C, n = 3.29 × 10¹⁷ m⁻³. With σ = 10⁻¹⁶ cm² (10⁻²⁰ m²), λ = 304 m; over L = 7.6 m survival is 97.5%. With a low-energy σ = 10⁻¹⁵ cm² and L = 15 m, λ = 30.4 m and survival drops to 61% — the survival arithmetic behind the 10⁻⁵–10⁻⁶ torr operating pressures in the [census's record](https://cyclotroninfo.com/builds/#compare) (which pressure a given machine needed also turned on RF holdoff, source load, and how much loss it could accept).

Orbit mode, the site's reference point: protons, B = 0.6 T, 150 keV, 1 kV peak on the dee, two crossings — 75 turns to a 9.33 cm radius, 29.6 m of path. At 1 × 10⁻⁵ torr survival is 89.9%, against 90.7% from simple mode with σ = 10⁻¹⁶ cm². H₂⁺ to 75 keV at the same radius — 37.5 turns, 14.9 m — survives 71.5% at 1 × 10⁻⁵ torr, where simple mode with 10⁻¹⁶ cm² would have said 95.1%. Both values are recomputed against an independent implementation whenever this page's model changes; the last such revision (energy-consistent stopping) is dated in the [changelog](https://cyclotroninfo.com/changelog/).

### Sources

- C. F. Barnett et al., *Atomic Data for Fusion, Vol. 1: Collisions of H, H₂, He and Li Atoms and Ions with Atoms and Molecules*, ORNL-6086/V1, 1990 — H⁺ + H₂ capture p. A-28, H₂⁺ + H₂ total destruction p. G-46. [OSTI](https://www.osti.gov/biblio/6570226), retrieved 2026-08-23.
- J. F. O'Hanlon, *A User's Guide to Vacuum Technology*, 3rd ed., Wiley, 2003 — kinetic theory; molecular diameters from Appendix B.2 (H₂ 0.274 nm). [Library entry](https://cyclotroninfo.com/library/#lib-020).

The narrative behind this calculator — gas load, effective pumping speed, the dee interior, and a worked budget — is the [vacuum page](https://cyclotroninfo.com/learn/vacuum/); the sourced rules are the design guide’s [vacuum domain](https://cyclotroninfo.com/design-guide/vacuum/). What gas scattering does to the beam itself is covered in [beam quality](https://cyclotroninfo.com/learn/beam-quality/).

Educational reference, not an operating procedure: results reflect the stated model and assumptions. Verify anything safety-critical against primary sources, and read the [safety fundamentals](https://cyclotroninfo.com/learn/safety/) before applying numbers to real hardware. Last reviewed: 9 September 2026 · [Report a correction](mailto:info@cyclotroninfo.com?subject=Correction%3A%20Vacuum%20%26%20Beam%20Survival%20Calculator).
