---
title: "Cyclotron Calculators · Cyclotron Info"
canonical: https://cyclotroninfo.com/calculators/
description: "Cyclotron design calculators that run in your browser — energy, path length, vacuum, magnet power, coil geometry, lid deflection, and RF matching — each with a scale diagram that redraws as you type, and its model and limits stated."
generated: 2026-11-22
note: "Markdown rendering of the canonical HTML page, generated at build for AI assistants and text tools. Figures and interactive elements are described, not reproduced. On Design Guide rules the source quote, this site's paraphrase and this site's editorial note are labelled separately and must not be conflated."
licence: "Datasets CC BY 4.0, census snapshot CC BY-NC 4.0 (https://cyclotroninfo.com/data/); cite as Cyclotron Info, cyclotroninfo.com"
---
# Calculators

Interactive design calculators for small cyclotrons. Each one runs entirely in the browser — nothing is sent anywhere — and each page derives the formulas it uses, states its assumptions and limits of validity, and cites the standard references the formulas come from. Sensible defaults are prefilled so every calculator shows a worked example the moment it loads, and the address bar tracks your inputs — copy the URL to share a specific calculation. When a calculator isn't enough, the [free modeling & simulation tools guide](https://cyclotroninfo.com/learn/modeling-tools/) surveys the software that answers the harder questions.

### [Cyclotron Energy](https://cyclotroninfo.com/calculators/cyclotron-energy/)

Beam energy, resonance frequency, magnetic rigidity, and particle speed from field, radius, and particle — with a check on when relativity starts to matter.

### [Path Length & Turns](https://cyclotroninfo.com/calculators/path-length/)

Energy gain per turn, turn count, total spiral path length, and orbit separation from the dee voltage — the numbers behind vacuum and extraction requirements.

### [Vacuum & Beam Survival](https://cyclotroninfo.com/calculators/vacuum/)

Mean free path and estimated surviving beam fraction versus pressure, residual gas, and path length; what pressure keeps losses under 10%.

### [Magnet Power](https://cyclotroninfo.com/calculators/magnet-power/)

Amp-turns required for a gap field, and coil dissipation from either a known winding or a copper mass budget — with honest saturation limits.

### [Coil Geometry](https://cyclotroninfo.com/calculators/coil-geometry/)

Outer diameter, conductor length, hot and cold resistance, and copper mass of a layer-wound magnet coil.

### [Lid Deflection](https://cyclotroninfo.com/calculators/lid-deflection/)

Center deflection, peak stress, and safety factor of a circular vacuum chamber lid under atmosphere, for O-ring and bolted edges.

### [Dee Capacitance & RF Matching](https://cyclotroninfo.com/calculators/dee-capacitance-matching/)

Estimated dee-to-liner capacitance, the inductance to resonate it, and an L-network to match the tank to a 50 Ω source.

## When one calculator is not enough

The [Cyclotron Builder](https://build.cyclotroninfo.com/) (planning grade; hosted) chains these questions together: it turns a budget, a space and a power outlet into a costed design with every subsystem sized, and can verify a design's orbits. Every interactive tool on the site, with its grade and where it computes, is listed on the [Tools](https://cyclotroninfo.com/tools/) page.
